Products

Sonesse® 510S2 PA - 1002323 - 1 - Somfy

Act for green

Sonesse® 510S2 PA - 1002323 - 1 - Somfy

Sonesse® 510S2 PA - 1002323 - 2 - Somfy

Ref : 1002323 - 510S2 SONESSE PA 10/32 2464

Sonesse® 510S2 PA

ULTRA-quiet, ULTRA-strong

The Sonesse® 50 puts window coverings in motion with quiet precision. This wired motor features mechanical progressive limits, and is ideal for a variety of interior and exterior window covering applications.

Applications
Interior Window Coverings : Shades / Projection screen
Embedded Technologies	Warranty
Wired	5 years

Product benefits

Multiple Applications

Interior, Exterior, Residential, and Commercial.

Simple Installation & Setup

Compatible with leading industry hardware.
Can be mounted in the bracket six different ways.
Features a "snap-on" style connection for roller tube adaptors.
Interchangeable power cords, or a quick connector with extension options, provide multiple power cord lengths to meet installation demands.
Limits can be set using mechanical progressive adjustment.
Power output upon reaching motor limit.
Suitable for tubes diameter 47mm or more (internal diameter).

Compatibility

Compatible with wired control options.
Easily integrates with third-party control systems.
No power consumption when motor is idle, a green solution.

Details and specifications

Dimension

Weight (with packaging) : 2.41 kg

Help me to sell

Comfort & Convenience

Convenient solution for glare reduction and privacy.
Superior performance, reliability and ease of operation.
Close and open all window treatments with a single gesture.

Quiet

At the office or at home, silence is a key factor for well being. The Sonesse® range offers an added value of acoustic performance to quality and compatibility.

Energy Savings

Energy costs reduction and protecting furnishings from damaging UV rays.
Utilize timers to schedule daily open and close times.
Add sensors that react to the sun's intensity & positioning.

Other documents & links

Installation information

Section Act for green

Technical information

Approval
UR

Standard
Protection Index	IP 44
Insulation class	Class I

Dimension
Unwrapped product weight	2.41 kg
Unwrapped length	616 mm
Unwrapped width	63 mm
Unwrapped height	63 mm
Minimum internal diameter	47 mm
External Diameter	45 mm
Diameter	50 mm
Riveting position distance	590 mm

Electrical
Consumption during operation	200 W
Consumption in standby mode	0 W
Minimum voltage	108 V
Maximum voltage	132 V
Rated current	1.67 A
Power supply	AC - RGE 2 - 120V/60HZ

Mechanical
Speed	32 rpm
Torque	10 Nm
Type of limit switch unit	Mechanical
Capacity of the limit switch unit (turns)	29
Power scale	AC MOTOR SINGLE PHASE 37,5W TO 750W
Repeatabilty	+/- 8
Head type	STAR

Cable
Cable type	2464
Cable length	0.12 m
Cable color	WHITE
Number of wires of the cable	4
Cable plug ends	STRIPPED
Wire section	0.82 mm²

Other
Minimum working temperature	-20 °C
Maximum working temperature	60 °C
Minimum storing temperature	-20 °C
Maximum storing temperature	80 °C
Thermical time	4 min
Noise level (dB)	47.2 dB

End Product
End Product Type	Roller blinds, Roman blinds, Pleated and cellular blinds, Venetian blinds, Projection screens, Zebra blinds

Accessories

142 Product(s)

13mm Square Drive Shaft - 12mm OD for End Cap

Intermediate Bracket Ceiling Mount 55P, 0-90 Degrees

RollEase “Silent Pin" Star Head Motor Bracket (White)

LT50 Drive 80mm Rollerbat

Sonesse® ULTRA 50 Universal Pin End Cap - 10mm.

Fast Connector Extension Cable 4C SJTW - 8.4 ft.

Tool for WAGO AC Quick Connector

2.0" Tube - 10mm Shaft End Cap

Idler End Cap without Shaft 2.5" OD with M5 Screw

2.5" (60mm) Round Drive "Soft Clip"

Universal End Cap - Collapsible 10mm Shaft (Shorter Pin than Item 9420800)

Spring Ring with Loop

Roller Tube End Cap with 12mm Hole

Anti-Blocking System (ABS) 500 Series Right Rotation

SM65 (63mm) Round Crown - 3 grooves

DS 85mm Round Crown

SM65 (63mm) Round Drive

DS 70mm Round Drive (0.8mm - 1mm)

AMA/P71 LT50 Drive

DS 78mm/R Round Drive

Sonesse® 50 Adjuster Tool (for Idler Brackets and End Plugs)

2.5" Fabric/Cord Clip

Sonesse® 50 Crown (for 56mm Acmeda Tube 10Nm Max)

Sonesse® 50 Drive Wheel 50mm x 1.5mm Soft Clip- Quiet Accessory for Sonesse® Motors

Weld-on Bracket without Spring Ring

LT50 Idler Bracket with 10mm Hole Nylon Bearing

Light Duty Angle LT50 Type

LT50 2" Universal Intermediate Bracket Kit

LT50 HA Flush Mount Motor Bracket

Heavy Duty LT Intermediate Support Bracket

60mm Octagonal Drive

AMA/P71 LT50 Crown

Ball Support for 9410803 and 9028665

Standard Motor Tester Cable, 4-Wire

DS70 LT50 Set (0.8mm - 1mm Kit)

Sonesse® 50 Pin End Cap 10mm - Quiet Accessory for 2" Tube

U Shaped Idler Bracket

2.0" Fabric/Cord Clip

2.5" (60mm) Round Crown

2.75" (67mm) Round Crown

Motor Bracket with Spring Ring - Square (120mm x 120mm)

56mm OD Aluminum Sonesse® 50 Tube (16 ft. Lengths) - White Powder Coat

Cord Take-Up Reel for 56mm Tube

White Plastic Cover for LT Bracket

LT50 Intermediate Bracket with 16mm ID Bearing

LT50 Adjustable Universal Motor Bracket

4-Conductor Motor Cable SJTW (Sold per Foot)

Modified LT60 DS 78 Drive (Key Way Widened)

LT50 Angle Plate for Motor Bracket

70mm Octagonal LT50 Crown

Non-Adjustable Idler End Bracket 55P

Sonesse® 50 Drive Wheel 50mm x 1.5mm Hard Clip- Quiet Accessory for Sonesse® Motors

RollEase “Silent Pin" Crown Only for RollEase 2.5" (63mm) Tube

Sonesse® 50 & LT50/LT60 SJTW 4C Cable - 10 ft.

Sonesse® 50 & LT50/LT60 SJTW 4C Cable - 24 ft.

Fast Connector Extension Cable 4C SJTW - 4.4 ft.

Fast Connector Extension Cable 4C SJTW - 16.4 ft.

LT50 Crown 70mm Rollerbat

Grey WAGO AC Quick Connector (4 pins)

Idler End Cap without Shaft 2.0" OD with M5 Screw

Intermediate Bearing Support for 1781018

2.5" Round LT50 Drive "Hard Clip"

2" (47mm) Round Drive "Hard Clip"

LT Motor Bracket

Nylon ball bearing 10mm ID for 1781030

Heavy Duty End Cap Shaft

Universal End Cap - Collapsible 10mm Shaft (for 2" (47mm) Round Tube)

Heavy Duty Idler Bracket with Idler End Cap Holder

Anti-Blocking System (ABS) 500 Series Left Rotation

DS 70 LT50 Crown

LT Compact ST Motor Bracket PA66 with Spring Ring

Drive Stop and Screw

Take-Up Reel for 2" Tube

Idler Bracket 14mm ID

2.75" (67mm) Round LT50 Set "Hard Clip"

LT50 Drive 70mm Rollerbat

70mm LT50 Crown

Sonesse® 50 Pin End Cap 12mm - Quiet Accessory for 2" Tube

LT50 Crown 80mm Rollerbat

Sonesse® ULTRA 50 Universal Pin End Cap - 12mm

Nylon Ball Bearing 12mm ID for 1781030

14mm Bearing Plate for Idler Bracket Kit

Cable Guide for 63mm x 1.5mm (approx 2.5") Tube

4.0" Round LT50 Drive

Heavy Duty Angle Bracket for 9430610

Universal End Cap - Collapsible 12mm Shaft (for 2" (47mm) Round Tube)

Screw for Standard LT50 Motor

2.0" Plastic Idler End Cap - 10mm Shaft

Spring Ring with Locking Screw

56mm OD Aluminum Sonesse® 50 Tube (16 ft. Lengths) - Mill Finish

Idler Bearing for 12mm Shaft

Cord Fastener for 56mm Tube

2.5" (60mm) Round LT50 Set "Hard Clip"

Idler Bracket Kit 10mm (Ball & Holder)

Sonesse® 50 Adjustable Idler End Bracket - Ceiling Mount 55P

Sonesse® 50 Drive (for 56mm Acmeda Tube 10Nm Max)

RollEase “Silent Pin" Idler Bracket (Wall and Ceiling Mount) (White)

LO LT50 Motor Bracket with Stud (25 Nm max.)

2" (47mm) Round Drive "Soft Clip"

LT50 Adjustable Angle Bracket

LT50 Universal Motor Bracket (50Nm Max)

DS 78mm Round Drive

DS 85mm Round Drive

Universal Motor Bracket (Metric) with Spring Ring and Threaded for M8 and M6 Bolts

13mm Sq. Intermediate Drive Shaft - 16mm OD for 9146011

2.0" Aluminum Tube (Minimum Order Length 20')

2.5" OD Aluminum Tube (Minimum Order Length 16')

60mm Octagonal LT50 Set

Intermediate Bracket Ceiling Mount 55P

RollEase “Silent Pin" Idler End Pin

Fast Connector Extension Cable 4C SJTW - 22.4 ft.

2.0" End Cap with 12mm Shaft

LT50 Idler Bracket with 12mm Hole Nylon Bearing

3.5" Round LT50/60 Drive (89mm x 2mm)

Nylon Ball Bearing and Holder with 12mm Hole for 9420604

DS 78mm Round Crown

70mm Octagonal Drive

DS 78mm/D Round Drive

Universal Motor Bracket - US Threads

RollEase 3.25" (83mm) Profiled Tube

LT50 Adjustable Intermediate Support Bracket for 2" Tube

70mm Octagonal LT50 Set

2" Collapsible End Cap (Silent) - 10mm Shaft

Idler End Cap (for 56mm Acmeda Tube)

Intermediate Male Idler End Plug (for 56mm Acmeda tube)

Intermediate Female Idler End Plug (for 56mm Acmeda tube)

Sonesse® 50 Star Head Motor Bracket 55P

RollEase “Silent Pin" Crown & Drive Adaptor for 3.25" (83mm) Tube

Sonesse® 50 & LT50 Motor Pigtail to Fast Connector SJTW 4C Cable - 1.6 ft.

Pull Off Tool for Spring Ring

LO LT50 Motor Bracket with Stud (25 Nm max.)

Heavy Duty Angle Plate with Universal Motor Bracket (Max 85Nm)

Universal Motor Bracket with Spring Ring

Motor Bracket "U" Shape

Idler End Cap Holder (Anti-Vibration)

2.5" 60mm Octagonal Crown

Motor Bracket with Spring Ring - Square (100mm x 100mm)