Products
Ref : 2007146 - DMI6 HZ01 80/14 120/60 C6M PLU
DMI6Hz 80Nm 14rpm 120V With NEMA plug
DMI6HZ 80/14 120/60 C6M PLUG SJTW18
| Applications | ||
|---|---|---|
| Awning / Rolling shutter | ||
| Embedded Technologies | Warranty | |
| Hz | 5 years | |
Technical information
| Approval |
|---|
|
Standard |
|
|---|---|
| Protection Index | IP 44 |
| Insulation class | Class I |
Dimension |
|
|---|---|
| Unwrapped length | 878 mm |
| Unwrapped width | 92 mm |
| Unwrapped height | 92 mm |
| Minimum internal diameter | 60 mm |
| External Diameter | 58 mm |
| Diameter | 60 mm |
Technology |
|
|---|---|
| Radio Frequency | 433.420 MHz |
| Range in open field | 150 m |
Electrical |
|
|---|---|
| Consumption during operation | 390 W |
| Consumption in standby mode | 0.34 W |
| Minimum voltage | 108 V |
| Maximum voltage | 126 V |
| Rated current | 3.4 A |
| Power supply | AC - RGE 2 - 120V/60HZ |
Mechanical |
|
|---|---|
| Speed | 14 rpm |
| Torque | 80 Nm |
| Type of limit switch unit | Mechanical |
| Capacity of the limit switch unit (turns) | 28 |
| Power scale | AC MOTOR SINGLE PHASE 37,5W TO 750W |
| Head type | CMO |
Cable |
|
|---|---|
| Cable type | SJTW |
| Cable length | 6 m |
| Cable color | WHITE |
| Number of wires of the cable | 3 |
| Cable plug ends | NEMA PLUG |
| Wire section | 0.75 mm² |
Other |
|
|---|---|
| Minimum working temperature | -20 °C |
| Maximum working temperature | 60 °C |
| Thermical time | 5 min |
Accessories
44 Product(s)
Vertical wall angle bracket for side plates 9017157 and 9017166
Réf. 9017172
DMI Bracket 3 piece outside mount
Réf. 9520079
T6 70mm Octagonal
Réf. 9530117
97mm Idle Insert
Réf. 9542009
T6 85mm Round (Simbac Tube) Crown
Réf. 9690085
Universal Joint 7mm Hex to 8mm Square Connector
Réf. 2005416
Standard Motor Tester Cable, 4-Wire
Réf. 9012116
Connector Sleeve 7mm Hex to 8mm Square
Réf. 9012323
T6-8-9 330X330 Idler side wall plate
Réf. 9017168
Extension Shaft 7mm Hex L=220mm with Screw
Réf. 9420657
T6 85mm Round (Simbac Tube)
Réf. 9530109
Connector Sleeve 7mm Hex to 7mm Hex
Réf. 9685120
Idler Support
Réf. 2003807
T5/T6 70mm OCTAGONAL Aluminum
Réf. 9011878
2.5" (60mm) Round Drive "Soft Clip"
Réf. 9206041
T6 94mm Round
Réf. 9530124
T6 Drive Stop & Screw
Réf. 9910062
94mm Idle Insert
Réf. 9542008
78mm Round Crown
Réf. 9707640
DMI Bracket 2 piece inside mount adjustable U
Réf. 2005701
107mm Sleeve Adaptor (Adaptor Set / Differential required for use)
Réf. 9012817
T6-8-9 330X330 Motor side wall plate
Réf. 9017158
LT60 Drive 80mm Rollerbat
Réf. 9019558
T5/T6 67mm ROUND
Réf. 9206028
T5/T6 85mm Round (Simbac Tube)
Réf. 9420300
DMI Bracket 1 piece round adjustable cast plate
Réf. 9420647
DS 78mm Round Crown
Réf. 9707639
T6-8-9 280X280 Idler side wall plate
Réf. 9017166
2.75" (67mm) Round Crown
Réf. 9420342
70mm Octagonal LT60 Crown
Réf. 9705340
DMI Bracket 100mm x 100mm
Réf. 9706034
70mm Octagonal Drive
Réf. 9761002
DS 78mm/D Round Drive
Réf. 9761004
LT60 Crown 80mm Rollerbat
Réf. 9019557
DS 78mm/R Round Drive
Réf. 9761005
T6 Differential 60mm round
Réf. 9001407
T5/T6 60mm Round Drive Aluminum
Réf. 9012950
Short Awning Override Shaft Ring
Réf. 9016332
T6-8-9 280X280 Motor side wall plate
Réf. 9017157
.png.jpg)
T6 70mm Octagonal Aluminum drive wheel
Réf. 9018630
DMI Bracket 1 piece round adjustable plate
Réf. 9420654
Extension Shaft 7mm Hex L=330mm with Screw
Réf. 9420659
DMI Bracket 2 piece inside mount
Réf. 9520074
T6 78mm Round
Réf. 9530107