Products
Ref : 2008626 - T820/10 S DMI Ø99-108 120/60
T8S DMI 200Nm Diameter 99-108mm 120V (SLIM Head)
MOTOR T8SDMI 200Nm D99-108 120/60
MOTOR T8SDMI 200 �99-108 120/60
| Applications | ||
|---|---|---|
| Industrial & commercial closure / Rolling shutter | ||
| Embedded Technologies | Warranty | |
| Wired | 5 years | |
Technical information
| Approval |
|---|
|
Standard |
|
|---|---|
| Protection Index | IP 44 |
| Insulation class | Class I |
| Gate operator type | Axial tubular |
Dimension |
|
|---|---|
| Unwrapped length | 710 mm |
| Unwrapped width | 130 mm |
| Unwrapped height | 130 mm |
| Diameter | 80 mm |
Technology |
|
|---|---|
| Number of cycles per day (in cycles) | 10 |
Electrical |
|
|---|---|
| Consumption during operation | 600 W |
| Consumption in standby mode | 0 W |
| Minimum voltage | 108 V |
| Maximum voltage | 132 V |
| Rated current | 5.3 A |
| Power supply | AC - RGE 2 - 120V/60HZ |
Mechanical |
|
|---|---|
| Speed | 10 rpm |
| Torque | 200 Nm |
| Power scale | AC MOTOR SINGLE PHASE 37,5W TO 750W |
Cable |
|
|---|---|
| Number of wires of the cable | 4 |
| Wire section | 0.65 mm² |
Other |
|
|---|---|
| Minimum working temperature | 5 °C |
| Maximum working temperature | 40 °C |
| Minimum storing temperature | -20 °C |
| Maximum storing temperature | 80 °C |
| Thermical time | 4 min |
| Shape | TUBULAR |
Accessories
22 Product(s)
Safety Brake 3000Nm Torque
Réf. 2005625
T6-8-9 280X280 Idler side wall plate
Réf. 9017166
T8 94mm Round Drive for 200Nm to 280Nm
Réf. 9001297
Safety Brake 404Nm Torque
Réf. 2005627
T8-S DMI Eye and Hex Shaft .28” x 15.7” (7 mm x 400mm)
Réf. 9018569
T6-8-9 280X280 Motor side wall plate
Réf. 9017157
124mm Idle Insert
Réf. 9542012
Safety Brake 1500Nm Torque
Réf. 2005624
T6-8-9 330X330 Motor side wall plate
Réf. 9017158
Chain for Chain Hoist
Réf. 9019460
Idler Support
Réf. 2003807
Safety Brake 708Nm Torque
Réf. 2005628
94mm Idle Insert
Réf. 9542008
Safety Brake 1000Nm Torque
Réf. 2005629
Chain Hoist for T8S DMI motors (without chain)
Réf. 9019458
Safety Brake 258Nm Torque
Réf. 2005626
T8 97mm Round Set for 200Nm to 280Nm
Réf. 9001312
Standard Motor Tester Cable, 4-Wire
Réf. 9012116
T8 124mm Round Set for 200Nm to 280Nm
Réf. 9013824
T6-8-9 330X330 Idler side wall plate
Réf. 9017168
Vertical wall angle bracket for side plates 9017157 and 9017166
Réf. 9017172
97mm Idle Insert
Réf. 9542009
