With button:

1. Press and hold the motor head button for ~12 seconds, until the motor jogs 3 separate times.
2. Reconnect power if there is an external battery or power source. The motor should jog or move.
3. Press and hold the PROG button on the back of the remote for about 15 seconds until the motor jogs twice. All previous settings are now erased.

Without button:

1. Disconnect power for 2 seconds.

2. Reconnect power for 10 seconds.

3. Disconnect power for 2 seconds.

4. Reconnect power. The motor should jog or move.

5. Press and hold the Programming Button on the back of the remote for about 15 seconds until the motor jogs twice. All previous settings are now erased.