Products
Ref : 1033402 - 525A2 OXIMO RTS 25/20 SJTW10FT
Oximo™ RTS 525A2
Simplicity without limits
Oximo™ is a smart choice for motorizing rolling shutters. It is compatible with all types of rolling shutters and can be controlled with any Radio Technology Somfy accessory including hand-held remote controls, wireless wall switches, and timers.
| Applications | ||
|---|---|---|
| Rolling shutter | ||
| Embedded Technologies | Warranty | |
| RTS | 5 years | |
Product benefits
Obstacle Detection
- Stops the shutter from coming down automatically when obstacles are detected to protect belongings.
Frost Protection
- Stops the motor if frost or ice freezes the shutter in place, preserving the integrity of the motor and the shutter.
Tamper Resistant
- Resists manual lifting for improved security when used with rigid links.
Automatic Limit Setting
- Flexible limit settings can be adjusted automatically or manually.
Details and specifications
Storm Protection
- Preferred choice to protect your home from severe weather.
- Remote access via simple to use app.
Energy Savings
- Reduce energy consumption up to 40%.
- Utilize timers to schedule daily open and close times.
- Add sensors that react to the sun's intensity & positioning.
Comfort & Convenience
Other documents & links
Product presentation
Installation information
Downloads & videos
- How to Set The My Favorite Position of a Somfy Radio Motor View
- How to Remove a Control Point From a Somfy Radio Motor View
- How to Reset a Somfy Radio Roller Shutter Motor View
- How to Add an Additional Radio Control Point to a Somfy Radio Motor View
- How to Add a Multi-Channel Control Point to a Somfy Radio Motor View
- How to Change The Rotation Direction of a Somfy Radio Roller Shutter Motor View
- How to Add a Telis 16 RTS to a Somfy RTS motor View
- How to Set The End Limits of a Somfy Wired Roller Shutter Motor View
Section Act for green
Technical information
| Approval |
|---|
| UR |
Standard |
|
|---|---|
| Protection Index | IP 44 |
| Insulation class | Class I |
Dimension |
|
|---|---|
| Unwrapped length | 663 mm |
| Unwrapped width | 63 mm |
| Unwrapped height | 63 mm |
| Minimum internal diameter | 47 mm |
| External Diameter | 45 mm |
| Diameter | 50 mm |
Technology |
|
|---|---|
| Radio Frequency | 433.420 MHz |
| Number of channels | 9 |
| Range in open field | 200 m |
| Memory capacity | 12 |
| Coding | Rolling code 16 million of possibilities |
Electrical |
|
|---|---|
| Consumption during operation | 180 W |
| Consumption in standby mode | 0.37 W |
| Minimum voltage | 195.5 V |
| Maximum voltage | 255 V |
| Rated current | 1.6 A |
| Power supply | AC - RGE 2 - 120V/60HZ |
| Antenna | Integrated |
Mechanical |
|
|---|---|
| Speed | 20 rpm |
| Torque | 25 Nm |
| Type of limit switch unit | Electronic |
| Capacity of the limit switch unit (turns) | 200 |
| Power scale | AC MOTOR MULTI PHASE 37,5W TO 750W |
| Repeatabilty | < +/- 3 |
| Head type | STAR |
| Thermal tripping | 140 °C |
Cable |
|
|---|---|
| Cable type | SJTW |
| Removable cable | Yes |
| Cable length | 3 m |
| Cable color | WHITE |
| Number of wires of the cable | 3 |
| Cable plug ends | STRIPPED |
| Wire section | 0.75 mm² |
Other |
|
|---|---|
| Minimum working temperature | -20 °C |
| Maximum working temperature | 70 °C |
| Minimum storing temperature | -40 °C |
| Maximum storing temperature | 80 °C |
| Thermical time | 4 min |
| Shape | TUBULAR |
Accessories
136 Product(s)
56mm OD Aluminum Sonesse® 50 Tube (16 ft. Lengths) - Mill Finish
Réf. 1780743
Cord Fastener for 56mm Tube
Réf. 1781408
3-Conductor Motor Cable SJTW (Sold per Foot)
Réf. 9012111
LT50 Drive 70mm Rollerbat
Réf. 9016059
RollEase “Silent Pin" Crown & Drive Adaptor for 3.25" (83mm) Tube
Réf. 9016855
Sonesse® ULTRA 50 Universal Pin End Cap - 10mm.
Réf. 9019716
Nylon Ball Bearing 12mm ID for 1781030
Réf. 9028665
2.0" Tube - 10mm Shaft End Cap
Réf. 9128101
Idler End Cap without Shaft 2.5" OD with M5 Screw
Réf. 9129632
Weld-on Bracket without Spring Ring
Réf. 9206029
LT50 2" Universal Intermediate Bracket Kit
Réf. 9410648
Roller Tube End Cap with 12mm Hole
Réf. 9701288
SM65 (63mm) Round Crown - 3 grooves
Réf. 9707030
DS 85mm Round Crown
Réf. 9707035
AMA/P71 LT50 Drive
Réf. 9751015
Motor Bracket with Spring Ring - Square (100mm x 100mm)
Réf. 9763508
Idler Bracket 14mm ID
Réf. 9002540
2.5" Fabric/Cord Clip
Réf. 9012201
60mm Octagonal LT50 Set
Réf. 9012233
DS 78 LT50 Set
Réf. 9012239
Sonesse® 50 Adjustable Idler End Bracket - Ceiling Mount 55P
Réf. 9014110
RollEase “Silent Pin" Idler Bracket (Wall and Ceiling Mount) (White)
Réf. 9016859
70mm LT50 Crown for Tube (with Groove)
Réf. 9017507
Sonesse® 50 Pin End Cap 12mm - Quiet Accessory for 2" Tube
Réf. 9018228
LT50 Crown 80mm Rollerbat
Réf. 9019555
Fast Connector Extension Cable 3C SJTW with NEMA Plug - 18 ft.
Réf. 9020792
Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable with NEMA Plug - 1.5 ft.
Réf. 9021049
Fast Connector Extension Cable 3C SJTW with NEMA Plug - 4.4 ft.
Réf. 9021114
LT50 Adjustable Angle Bracket
Réf. 9410639
Universal End Cap - Collapsible 10mm Shaft (Shorter Pin than Item 9420800)
Réf. 9420814
Spring Ring with Loop
Réf. 9685025
DS 78mm/R Round Drive
Réf. 9761005
13mm Sq. Intermediate Drive Shaft - 16mm OD for 9146011
Réf. 1781018
2.0" Aluminum Tube (Sold by Foot in 20' increments)
Réf. 1781148
Take-Up Reel for 2" Tube
Réf. 1781151
2" Collapsible End Cap (Silent) - 10mm Shaft
Réf. 9013592
Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable - 10 ft.
Réf. 9018190
Fast Connector Extension Cable 3C SJTW with NEMA Plug - 10.4 ft.
Réf. 9020791
Sonesse® 50 & LT50 RTS/RS485 Motor Pigtail to Fast Connector SJTW 3C Cable - 1.6 ft.
Réf. 9020803
Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable with NEMA Plug - 24 ft.
Réf. 9021053
U Shaped Idler Bracket
Réf. 9127808
2" (47mm) Round Drive "Hard Clip"
Réf. 9206088
4.0" Round LT50 Drive
Réf. 9420304
Universal Motor Bracket with Spring Ring
Réf. 9420631
Heavy Duty Idler Bracket with Idler End Cap Holder
Réf. 9430603
70mm Octagonal Drive
Réf. 9761002
DS 78mm/D Round Drive
Réf. 9761004
Universal Motor Bracket - US Threads
Réf. 9910021
56mm OD Aluminum Sonesse® 50 Tube (16 ft. Lengths) - White Powder Coat
Réf. 1780744
LT50 Intermediate Bracket with 16mm ID Bearing
Réf. 9002541
2.5" (60mm) Round LT50 Set "Hard Clip"
Réf. 9012231
70mm Octagonal LT50 Set
Réf. 9012234
70mm Octagonal LT50 Crown
Réf. 9012328
Idler Bracket Kit 10mm (Ball & Holder)
Réf. 9012657
RollEase “Silent Pin" Crown Only for RollEase 2.5" (63mm) Tube
Réf. 9016856
Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable with NEMA Plug - 6 ft.
Réf. 9021050
Fast Connector Extension Cable 3C SJTW with NEMA Plug - 8.4 ft.
Réf. 9021115
LT50 Crown 70mm Rollerbat
Réf. 9026982
2.0" End Cap with 12mm Shaft
Réf. 9132087
2.5" Round LT50 Drive "Hard Clip"
Réf. 9206019
LO LT50 Motor Bracket with Stud (25 Nm max.)
Réf. 9206021
2" (47mm) Round Drive "Soft Clip"
Réf. 9206089
LT Motor Bracket
Réf. 9410665
Nylon ball bearing 10mm ID for 1781030
Réf. 9410803
3.5" Round LT50/60 Drive (89mm x 2mm)
Réf. 9420303
Heavy Duty Angle Plate with Universal Motor Bracket (Max 85Nm)
Réf. 9420602
Idler End Cap Holder (Anti-Vibration)
Réf. 9540786
2.5" (60mm) Round Crown
Réf. 9707026
Idler Bearing for 12mm Shaft
Réf. 1781015
LT50 Adjustable Universal Motor Bracket
Réf. 9002550
P72 LT50 Set
Réf. 9012235
Modified LT60 DS 78 Drive (Key Way Widened)
Réf. 9012241
Sonesse® ULTRA 50 Universal Pin End Cap - 12mm
Réf. 9019717
Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable - 24 ft.
Réf. 9020985
Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable with NEMA Plug - 10 ft.
Réf. 9021051
Panel Mount, 3C Female Fast Connector
Réf. 9026398
Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable - 24 ft. (Black)
Réf. 9028738
Cable Guide for 63mm x 1.5mm (approx 2.5") Tube
Réf. 9146071
LT50 Universal Motor Bracket (50Nm Max)
Réf. 9410651
Heavy Duty End Cap Shaft
Réf. 9420674
Universal End Cap - Collapsible 12mm Shaft (for 2" (47mm) Round Tube)
Réf. 9420801
2.0" Plastic Idler End Cap - 10mm Shaft
Réf. 9700958
Anti-Blocking System (ABS) 500 Series Left Rotation
Réf. 9705415
DS 78mm Round Drive
Réf. 9761001
DS 85mm Round Drive
Réf. 9761003
Universal Motor Bracket (Metric) with Spring Ring and Threaded for M8 and M6 Bolts
Réf. 9910001
Drive Stop and Screw
Réf. 9910004
AMA/P71 LT50 Crown
Réf. 9997118
Ball Support for 9410803 and 9028665
Réf. 1781030
Standard Motor Tester Cable, 4-Wire
Réf. 9012116
2.75" (67mm) Round LT50 Set "Hard Clip"
Réf. 9012232
DS70 LT50 Set (0.8mm - 1mm Kit)
Réf. 9012237
LT50 Drive 80mm Rollerbat
Réf. 9019556
Fast Connector Extension Cable 3C SJTW with NEMA Plug - 24 ft.
Réf. 9020793
Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable with NEMA Plug - 18 ft.
Réf. 9021052
14mm Bearing Plate for Idler Bracket Kit
Réf. 9146007
LO LT50 Motor Bracket with Stud (25 Nm max.)
Réf. 9206020
LT50 Idler Bracket with 10mm Hole Nylon Bearing
Réf. 9410635
Heavy Duty Angle Bracket for 9430610
Réf. 9420604
Heavy Duty LT Intermediate Support Bracket
Réf. 9420673
Screw for Standard LT50 Motor
Réf. 9670013
60mm Octagonal Drive
Réf. 9751001
P72 LT50 Drive
Réf. 9761011
Spring Ring with Locking Screw
Réf. 9910002
White Plastic Cover for LT Bracket
Réf. 9002519
DS 74 LT50 Set
Réf. 9012238
Idler End Cap (for 56mm Acmeda Tube)
Réf. 9014097
Sonesse® 50 Star Head Motor Bracket 55P
Réf. 9014135
Sonesse® 50 Pin End Cap 10mm - Quiet Accessory for 2" Tube
Réf. 9016628
RollEase “Silent Pin" Idler End Pin
Réf. 9016857
Fast Connector Extension Cable 3C SJTW without NEMA Plug - 8.4 ft.
Réf. 9021157
2.0" Fabric/Cord Clip
Réf. 9138028
Intermediate Bearing Support for 1781018
Réf. 9146011
LT50 Idler Bracket with 12mm Hole Nylon Bearing
Réf. 9410633
LT50 HA Flush Mount Motor Bracket
Réf. 9410715
2.5" 60mm Octagonal Crown
Réf. 9707025
DS 78mm Round Crown
Réf. 9707027
13mm Square Drive Shaft - 12mm OD for End Cap
Réf. 1781009
2.5" OD Aluminum Tube (Sold by Foot in 16' increments)
Réf. 1781343
RollEase “Silent Pin" Star Head Motor Bracket (White)
Réf. 9016858
Fast Connector Extension Cable 3C SJTW with NEMA Plug - 1.4 ft.
Réf. 9021113
Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable - 10 ft. (Black)
Réf. 9028737
Idler End Cap without Shaft 2.0" OD with M5 Screw
Réf. 9129631
Pull Off Tool for Spring Ring
Réf. 9206015
Spring Ring
Réf. 9206033
2.5" (60mm) Round Drive "Soft Clip"
Réf. 9206041
Universal End Cap - Collapsible 10mm Shaft (for 2" (47mm) Round Tube)
Réf. 9420800
Nylon Ball Bearing and Holder with 12mm Hole for 9420604
Réf. 9430610
Motor Bracket "U" Shape
Réf. 9510658
Anti-Blocking System (ABS) 500 Series Right Rotation
Réf. 9705414
2.75" (67mm) Round Crown
Réf. 9707031
DS 70 LT50 Crown
Réf. 9707034
LT Compact ST Motor Bracket PA66 with Spring Ring
Réf. 9708461
SM65 (63mm) Round Drive
Réf. 9751002
DS 70mm Round Drive (0.8mm - 1mm)
Réf. 9751005
Motor Bracket with Spring Ring - Square (120mm x 120mm)
Réf. 9763503