Products

Altus® RTS 530R2 - 1038169 - 1 - Somfy

Act for green

Altus® RTS 530R2 - 1038169 - 1 - Somfy

Ref : 1038169 - 530R2 ALTUS RTS 30/14SJTW 10FT

Altus® RTS 530R2

Tubular motor typically used for exterior applications.

LT50 Altus is a tubular motor with no need for an electrician. Compatibility with the full range of RTS controls and accessories.

Applications
Awning / Exterior Solar Screens / Interior Window Coverings : Shades / Projection screen / Retractable Insect Screens / Rolling shutter
Embedded Technologies	Warranty
RTS	5 years

Product benefits

Easy Install

Plug and play motor with no need for costly wiring.
Interchangeable power cords, or a quick connector with extension options, provide multiple power cord lengths to meet installation demands.
RTS provides wireless commands to eliminate control wiring.
Limits easily set using a hand-held remote.

Comfort & Convenience

Long range remote control doesn't require direct line of sight.
Smartphone and tablet app available for quick and easy control even while away.
Use natural voice commands to control RTS motorized solutions with TaHoma.

Energy Savings

Motorized exterior screens can potentially block up to 90% of solar rays.
Motorized rolling shutters can reduce heat gain in the summer and heat loss in the winter by up to 40%.
Motorized retractable awnings can reduce heat gain in the summer by 77% while in use.

Protection

Motorized retractable awnings and exterior screens not only shield occupants from the sun, but offer a cool, comfortable outdoor living space.
Motorized rolling shutters provide a rigid protective barrier for any space and protect from storm damage.

Details and specifications

Help me to sell

Comfort & Convenience

Convenient solution for glare reduction and privacy.
Superior performance, reliability and ease of operation.
Close and open all window treatments with a single gesture.
Remotely control RTS products from any mobile device.
Use natural voice commands to control RTS motorized solutions by adding TaHoma.

Energy Savings

Utilize timers to schedule daily open and close times to control natural light and lower energy bills.
Motorized exterior screens can potentially block up to 90% of solar rays.
Motorized rolling shutters can reduce heat gain in the summer and heat loss in the winter by up to 40%.
Motorized retractable awnings can reduce heat gain in the summer by 77% while in use.

Protection

Add a sun sensor to control UV rays and protect furnishings automatically.
Add a wind sensor to protect end products from damage.
Motorized rolling shutters provide a rigid protective barrier for any space.

Other documents & links

Installation information

Downloads & videos

Section Act for green

Technical information

Approval
UR

Standard
Protection Index	IP 44
Insulation class	Class I

Dimension
Unwrapped length	663 mm
Unwrapped width	63 mm
Unwrapped height	63 mm
Minimum internal diameter	47 mm
External Diameter	45 mm
Diameter	50 mm
Riveting position distance	640 mm

Technology
Radio Frequency	433.420 MHz
Number of channels	12
Range in open field	200 m
Coding	Rolling code 16 million of possibilities

Electrical
Consumption during operation	170 W
Consumption in standby mode	0 W
Minimum voltage	108 V
Maximum voltage	132 V
Rated current	1.5 A
Power supply	AC - RGE 2 - 120V/60HZ
Antenna	Integrated

Mechanical
Speed	14 rpm
Torque	30 Nm
Type of limit switch unit	Electronic
Capacity of the limit switch unit (turns)	250
Power scale	AC MOTOR MULTI PHASE 37,5W TO 750W
Repeatabilty	< +/- 3
Head type	STAR
Thermal tripping	140 °C

Cable
Cable type	SJTW
Removable cable	Yes
Cable length	3 m
Cable color	WHITE
Number of wires of the cable	3
Cable plug ends	STRIPPED
Wire section	0.82 mm²

Other
Minimum working temperature	-20 °C
Maximum working temperature	70 °C
Minimum storing temperature	-20 °C
Maximum storing temperature	80 °C
Thermical time	5 min
Shape	TUBULAR

Accessories

144 Product(s)

Sonesse® 50 Adjuster Tool (for Idler Brackets and End Plugs)

56mm OD Aluminum Sonesse® 50 Tube (16 ft. Lengths) - White Powder Coat

LT50 Intermediate Bracket with 16mm ID Bearing

3-Conductor Motor Cable SJTW (Sold per Foot)

2.5" (60mm) Round LT50 Set "Hard Clip"

70mm Octagonal LT50 Crown

Sonesse® 50 Adjustable Idler End Bracket - Ceiling Mount 55P

RollEase “Silent Pin" Idler Bracket (Wall and Ceiling Mount) (White)

LT50 Crown 80mm Rollerbat

Sonesse® ULTRA 50 Universal Pin End Cap - 12mm

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable with NEMA Plug - 10 ft.

Fast Connector Extension Cable 3C SJTW with NEMA Plug - 8.4 ft.

Panel Mount, 3C Female Fast Connector

Nylon Ball Bearing 12mm ID for 1781030

2" (47mm) Round Drive "Soft Clip"

LT50 Universal Motor Bracket (50Nm Max)

SM65 (63mm) Round Crown - 3 grooves

DS 85mm Round Crown

DS 78mm/R Round Drive

Idler Bearing for 12mm Shaft

Take-Up Reel for 2" Tube

2.75" (67mm) Round LT50 Set "Hard Clip"

Intermediate Bracket Ceiling Mount 55P

LT50 Drive 70mm Rollerbat

70mm LT50 Crown

Fast Connector Extension Cable 3C SJTW with NEMA Plug - 18 ft.

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable - 24 ft.

Fast Connector Extension Cable 3C SJTW with NEMA Plug - 4.4 ft.

14mm Bearing Plate for Idler Bracket Kit

Cable Guide for 63mm x 1.5mm (approx 2.5") Tube

LT50 Adjustable Angle Bracket

Heavy Duty Angle Bracket for 9430610

Screw for Standard LT50 Motor

Spring Ring with Locking Screw

Universal Motor Bracket - US Threads

Cord Fastener for 56mm Tube

RollEase 3.25" (83mm) Profiled Tube

70mm Octagonal LT50 Set

2" Collapsible End Cap (Silent) - 10mm Shaft

Intermediate Male Idler End Plug (for 56mm Acmeda tube)

Intermediate Female Idler End Plug (for 56mm Acmeda tube)

RollEase “Silent Pin" Crown & Drive Adaptor for 3.25" (83mm) Tube

RollEase “Silent Pin" Idler End Pin

Sonesse® 50 Drive Wheel 50mm x 1.5mm Soft Clip- Quiet Accessory for Sonesse® Motors

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable with NEMA Plug - 6 ft.

Fast Connector Extension Cable 3C SJTW with NEMA Plug - 1.4 ft.

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable - 10 ft. (Black)

Pull Off Tool for Spring Ring

LT50 Idler Bracket with 12mm Hole Nylon Bearing

3.5" Round LT50/60 Drive (89mm x 2mm)

Heavy Duty Angle Plate with Universal Motor Bracket (Max 85Nm)

Idler End Cap Holder (Anti-Vibration)

2.5" 60mm Octagonal Crown

Motor Bracket with Spring Ring - Square (100mm x 100mm)

13mm Sq. Intermediate Drive Shaft - 16mm OD for 9146011

2.0" Aluminum Tube (Minimum Order Length 20')

Idler Bracket 14mm ID

LT50 Adjustable Intermediate Support Bracket for 2" Tube

60mm Octagonal LT50 Set

Idler End Cap (for 56mm Acmeda Tube)

Sonesse® 50 Star Head Motor Bracket 55P

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable - 10 ft.

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable with NEMA Plug - 24 ft.

2.0" End Cap with 12mm Shaft

4.0" Round LT50 Drive

Universal Motor Bracket with Spring Ring

Universal End Cap - Collapsible 10mm Shaft (for 2" (47mm) Round Tube)

Universal End Cap - Collapsible 10mm Shaft (Shorter Pin than Item 9420800)

Nylon Ball Bearing and Holder with 12mm Hole for 9420604

DS 78mm Round Crown

DS 70 LT50 Crown

DS 70mm Round Drive (0.8mm - 1mm)

13mm Square Drive Shaft - 12mm OD for End Cap

Standard Motor Tester Cable, 4-Wire

RollEase “Silent Pin" Star Head Motor Bracket (White)

Sonesse® 50 Pin End Cap 12mm - Quiet Accessory for 2" Tube

LT50 Drive 80mm Rollerbat

Fast Connector Extension Cable 3C SJTW with NEMA Plug - 24 ft.

Tool for WAGO AC Quick Connector

2.5" (60mm) Round Drive "Soft Clip"

Heavy Duty LT Intermediate Support Bracket

Spring Ring with Loop

2.75" (67mm) Round Crown

60mm Octagonal Drive

SM65 (63mm) Round Drive

AMA/P71 LT50 Drive

AMA/P71 LT50 Crown

56mm OD Aluminum Sonesse® 50 Tube (16 ft. Lengths) - Mill Finish

2.5" Fabric/Cord Clip

Intermediate Bracket Ceiling Mount 55P, 0-90 Degrees

Sonesse® ULTRA 50 Universal Pin End Cap - 10mm.

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable with NEMA Plug - 1.5 ft.

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable - 24 ft. (Black)

2.0" Tube - 10mm Shaft End Cap

Idler End Cap without Shaft 2.5" OD with M5 Screw

Weld-on Bracket without Spring Ring

LT50 Idler Bracket with 10mm Hole Nylon Bearing

Light Duty Angle LT50 Type

LT50 2" Universal Intermediate Bracket Kit

Universal End Cap - Collapsible 12mm Shaft (for 2" (47mm) Round Tube)

2.0" Plastic Idler End Cap - 10mm Shaft

Roller Tube End Cap with 12mm Hole

Ball Support for 9410803 and 9028665

2.5" OD Aluminum Tube (Minimum Order Length 16')

Cord Take-Up Reel for 56mm Tube

DS70 LT50 Set (0.8mm - 1mm Kit)

Sonesse® 50 Pin End Cap 10mm - Quiet Accessory for 2" Tube

Fast Connector Extension Cable 3C SJTW with NEMA Plug - 10.4 ft.

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable with NEMA Plug - 18 ft.

LT50 Crown 70mm Rollerbat

Grey WAGO AC Quick Connector (4 pins)

U Shaped Idler Bracket

2" (47mm) Round Drive "Hard Clip"

Nylon ball bearing 10mm ID for 1781030

70mm Octagonal Drive

DS 78mm/D Round Drive

Motor Bracket with Spring Ring - Square (120mm x 120mm)

White Plastic Cover for LT Bracket

LT50 Adjustable Universal Motor Bracket

Modified LT60 DS 78 Drive (Key Way Widened)

LT50 Angle Plate for Motor Bracket

Idler Bracket Kit 10mm (Ball & Holder)

Non-Adjustable Idler End Bracket 55P

RollEase “Silent Pin" Crown Only for RollEase 2.5" (63mm) Tube

Sonesse® 50 & LT50 RTS/RS485 Motor Pigtail to Fast Connector SJTW 3C Cable - 1.6 ft.

Fast Connector Extension Cable 3C SJTW without NEMA Plug - 8.4 ft.

Idler End Cap without Shaft 2.0" OD with M5 Screw

2.0" Fabric/Cord Clip

Intermediate Bearing Support for 1781018

2.5" Round LT50 Drive "Hard Clip"

LT50 HA Flush Mount Motor Bracket

Heavy Duty End Cap Shaft

Heavy Duty Idler Bracket with Idler End Cap Holder

2.5" (60mm) Round Crown

LT Compact ST Motor Bracket PA66 with Spring Ring

DS 78mm Round Drive

DS 85mm Round Drive

Universal Motor Bracket (Metric) with Spring Ring and Threaded for M8 and M6 Bolts

Drive Stop and Screw