Products

Altus® RTS 525A2 - 1043423 - 1 - Somfy

Act for green

Altus® RTS 525A2 - 1043423 - 1 - Somfy

Ref : 1043423 - 525A2 ALTUS RTS 25/20SJTW 10FT

Altus® RTS 525A2

Tubular motor typically used for exterior applications.

LT50 Altus is a tubular motor with no need for an electrician. Compatibility with the full range of RTS controls and accessories.

Applications
Awning / Exterior Solar Screens / Interior Window Coverings : Blinds, Shades / Projection screen / Retractable Insect Screens / Rolling shutter
Embedded Technologies	Warranty
RTS	5 years

Product benefits

Easy Install

Plug and play motor with no need for costly wiring.
Interchangeable power cords, or a quick connector with extension options, provide multiple power cord lengths to meet installation demands.
RTS provides wireless commands to eliminate control wiring.
Limits easily set using a hand-held remote.

Comfort & Convenience

Long range remote control doesn't require direct line of sight.
Smartphone and tablet app available for quick and easy control even while away.
Use natural voice commands to control RTS motorized solutions with TaHoma.

Energy Savings

Motorized exterior screens can potentially block up to 90% of solar rays.
Motorized rolling shutters can reduce heat gain in the summer and heat loss in the winter by up to 40%.
Motorized retractable awnings can reduce heat gain in the summer by 77% while in use.

Protection

Motorized retractable awnings and exterior screens not only shield occupants from the sun, but offer a cool, comfortable outdoor living space.
Motorized rolling shutters provide a rigid protective barrier for any space and protect from storm damage.

Details and specifications

Help me to sell

Comfort & Convenience

Convenient solution for glare reduction and privacy.
Superior performance, reliability and ease of operation.
Close and open all window treatments with a single gesture.
Remotely control RTS products from any mobile device.
Use natural voice commands to control RTS motorized solutions by adding TaHoma.

Energy Savings

Utilize timers to schedule daily open and close times to control natural light and lower energy bills.
Motorized exterior screens can potentially block up to 90% of solar rays.
Motorized rolling shutters can reduce heat gain in the summer and heat loss in the winter by up to 40%.
Motorized retractable awnings can reduce heat gain in the summer by 77% while in use.

Protection

Add a sun sensor to control UV rays and protect furnishings automatically.
Add a wind sensor to protect end products from damage.
Motorized rolling shutters provide a rigid protective barrier for any space.

Other documents & links

Product presentation

Installation information

Downloads & videos

Section Act for green

PEP ecopassport – Altus 50, Orea 50, Oximo 50, Maestria 50 - EN Download

Technical information

Approval
UR

Standard
Protection Index	IP 44
Insulation class	Class I

Dimension
Unwrapped length	613 mm
Unwrapped width	63 mm
Unwrapped height	63 mm
Minimum internal diameter	47 mm
External Diameter	45 mm
Diameter	50 mm
Riveting position distance	590 mm

Technology
Radio Frequency	433.420 MHz
Number of channels	12
Range in open field	200 m
Coding	Rolling code 16 million of possibilities

Electrical
Consumption during operation	180 W
Consumption in standby mode	0 W
Minimum voltage	108 V
Maximum voltage	132 V
Rated current	1.6 A
Power supply	AC - RGE 2 - 120V/60HZ
Antenna	Integrated

Mechanical
Speed	20 rpm
Torque	25 Nm
Type of limit switch unit	Electronic
Capacity of the limit switch unit (turns)	250
Power scale	AC MOTOR MULTI PHASE 37,5W TO 750W
Repeatabilty	< +/- 3
Head type	STAR
Thermal tripping	140 °C

Cable
Cable type	SJTW
Removable cable	Yes
Cable length	3 m
Cable color	WHITE
Number of wires of the cable	3
Cable plug ends	STRIPPED
Wire section	0.75 mm²

Other
Minimum working temperature	-20 °C
Maximum working temperature	70 °C
Minimum storing temperature	-20 °C
Maximum storing temperature	80 °C
Thermical time	5 min
Shape	TUBULAR
Noise level (dB)	56 dB

Accessories

142 Product(s)

56mm OD Aluminum Sonesse® 50 Tube (16 ft. Lengths) - Mill Finish

Idler Bearing for 12mm Shaft

Cord Fastener for 56mm Tube

2.5" (60mm) Round LT50 Set "Hard Clip"

70mm Octagonal LT50 Crown

Idler Bracket Kit 10mm (Ball & Holder)

RollEase “Silent Pin" Idler Bracket (Wall and Ceiling Mount) (White)

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable - 24 ft.

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable - 24 ft. (Black)

LO LT50 Motor Bracket with Stud (25 Nm max.)

Idler End Cap Holder (Anti-Vibration)

AMA/P71 LT50 Drive

DS 78mm Round Drive

DS 85mm Round Drive

Universal Motor Bracket (Metric) with Spring Ring and Threaded for M8 and M6 Bolts

Take-Up Reel for 2" Tube

Idler Bracket 14mm ID

Standard Motor Tester Cable, 4-Wire

2.75" (67mm) Round LT50 Set "Hard Clip"

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable - 10 ft.

Sonesse® 50 Pin End Cap 12mm - Quiet Accessory for 2" Tube

LT50 Crown 80mm Rollerbat

Sonesse® ULTRA 50 Universal Pin End Cap - 12mm

Fast Connector Extension Cable 3C SJTW with NEMA Plug - 24 ft.

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable with NEMA Plug - 1.5 ft.

Fast Connector Extension Cable 3C SJTW with NEMA Plug - 4.4 ft.

U Shaped Idler Bracket

14mm Bearing Plate for Idler Bracket Kit

Cable Guide for 63mm x 1.5mm (approx 2.5") Tube

LT50 Idler Bracket with 10mm Hole Nylon Bearing

Heavy Duty Angle Bracket for 9430610

Universal End Cap - Collapsible 12mm Shaft (for 2" (47mm) Round Tube)

Screw for Standard LT50 Motor

2.0" Plastic Idler End Cap - 10mm Shaft

60mm Octagonal Drive

Spring Ring with Locking Screw

70mm Octagonal LT50 Set

2" Collapsible End Cap (Silent) - 10mm Shaft

Idler End Cap (for 56mm Acmeda Tube)

Sonesse® 50 Star Head Motor Bracket 55P

Sonesse® 50 Pin End Cap 10mm - Quiet Accessory for 2" Tube

RollEase “Silent Pin" Crown & Drive Adaptor for 3.25" (83mm) Tube

Fast Connector Extension Cable 3C SJTW with NEMA Plug - 10.4 ft.

Pull Off Tool for Spring Ring

LO LT50 Motor Bracket with Stud (25 Nm max.)

2" (47mm) Round Drive "Soft Clip"

LT50 2" Universal Intermediate Bracket Kit

LT50 HA Flush Mount Motor Bracket

Heavy Duty Angle Plate with Universal Motor Bracket (Max 85Nm)

Universal Motor Bracket with Spring Ring

2.5" 60mm Octagonal Crown

Motor Bracket with Spring Ring - Square (100mm x 100mm)

13mm Sq. Intermediate Drive Shaft - 16mm OD for 9146011

2.0" Aluminum Tube (Sold by Foot in 20' increments)

2.5" OD Aluminum Tube (Sold by Foot in 16' increments)

White Plastic Cover for LT Bracket

4-Conductor Motor Cable SJTW (Sold per Foot)

60mm Octagonal LT50 Set

RollEase “Silent Pin" Idler End Pin

Fast Connector Extension Cable 3C SJTW with NEMA Plug - 18 ft.

Fast Connector Extension Cable 3C SJTW with NEMA Plug - 1.4 ft.

2.0" End Cap with 12mm Shaft

2.5" (60mm) Round Drive "Soft Clip"

2" (47mm) Round Drive "Hard Clip"

Nylon Ball Bearing and Holder with 12mm Hole for 9420604

DS 78mm Round Crown

70mm Octagonal Drive

DS 78mm/D Round Drive

LT50 RH "LO" Plate with Stud (Gold)

Universal Motor Bracket - US Threads

13mm Square Drive Shaft - 12mm OD for End Cap

Sonesse® 50 Adjustable Idler End Bracket - Ceiling Mount 55P

RollEase “Silent Pin" Star Head Motor Bracket (White)

70mm LT50 Crown for Tube (with Groove)

LT50 Drive 80mm Rollerbat

Sonesse® ULTRA 50 Universal Pin End Cap - 10mm.

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable with NEMA Plug - 18 ft.

2.0" Tube - 10mm Shaft End Cap

Idler End Cap without Shaft 2.5" OD with M5 Screw

LT50 Adjustable Angle Bracket

LT50 Universal Motor Bracket (50Nm Max)

Universal End Cap - Collapsible 10mm Shaft (Shorter Pin than Item 9420800)

Spring Ring with Loop

Roller Tube End Cap with 12mm Hole

Anti-Blocking System (ABS) 500 Series Right Rotation

SM65 (63mm) Round Crown - 3 grooves

DS 85mm Round Crown

DS 78mm/R Round Drive

3-Conductor Motor Cable SJTW (Sold per Foot)

2.5" Fabric/Cord Clip

LT50 Drive 70mm Rollerbat

Sonesse® 50 Drive Wheel 50mm x 1.5mm Soft Clip- Quiet Accessory for Sonesse® Motors

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable with NEMA Plug - 10 ft.

Nylon Ball Bearing 12mm ID for 1781030

2.0" Fabric/Cord Clip

Weld-on Bracket without Spring Ring

Heavy Duty LT Intermediate Support Bracket

AMA/P71 LT50 Crown

Ball Support for 9410803 and 9028665

DS70 LT50 Set (0.8mm - 1mm Kit)

RollEase "Silent Pin" Crown & Drive Adaptor for 2.5" (63mm) Tube

Sonesse® 50 & LT50 RTS/RS485 Motor Pigtail to Fast Connector SJTW 3C Cable - 1.6 ft.

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable with NEMA Plug - 6 ft.

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable with NEMA Plug - 24 ft.

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable - 10 ft. (Black)

4.0" Round LT50 Drive

Motor Bracket "U" Shape

2.5" (60mm) Round Crown

2.75" (67mm) Round Crown

SM65 (63mm) Round Drive

DS 70mm Round Drive (0.8mm - 1mm)

Motor Bracket with Spring Ring - Square (120mm x 120mm)

LT50 RH "LO" Plate with Stud (Silver)

56mm OD Aluminum Sonesse® 50 Tube (16 ft. Lengths) - White Powder Coat

LT50 Intermediate Bracket with 16mm ID Bearing

LT50 Adjustable Universal Motor Bracket

Modified LT60 DS 78 Drive (Key Way Widened)

RollEase “Silent Pin" Crown Only for RollEase 2.5" (63mm) Tube

Fast Connector Extension Cable 3C SJTW with NEMA Plug - 8.4 ft.

Fast Connector Extension Cable 3C SJTW without NEMA Plug - 8.4 ft.

Panel Mount, 3C Female Fast Connector

LT50 Crown 70mm Rollerbat

Grey WAGO AC Quick Connector (4 pins)

Idler End Cap without Shaft 2.0" OD with M5 Screw

Intermediate Bearing Support for 1781018

2.5" Round LT50 Drive "Hard Clip"

LT50 Idler Bracket with 12mm Hole Nylon Bearing

LT Motor Bracket

Nylon ball bearing 10mm ID for 1781030

3.5" Round LT50/60 Drive (89mm x 2mm)

Heavy Duty End Cap Shaft

Universal End Cap - Collapsible 10mm Shaft (for 2" (47mm) Round Tube)

Heavy Duty Idler Bracket with Idler End Cap Holder

Anti-Blocking System (ABS) 500 Series Left Rotation

DS 70 LT50 Crown

LT Compact ST Motor Bracket PA66 with Spring Ring

Drive Stop and Screw