Products

530R2 CMO - 1045017 - 1 - Somfy

Act for green

Ref : 1045017 - 530R2 30/14 CMO 2464 2M - UN

530R2 CMO

Standard 4 wire motor featuring a compact manual override

The LT50 CMO is a 120V/60Hz standard tubular motor featuring compact manual override to operate manually when power is not available.

Applications
Awning / Rolling shutter
Embedded Technologies	Warranty
Wired	5 years

Product benefits

Easy to Install & Use

Features a compact manual override (CMO) allowing operation in the event of a power failure.
A standard 4-wire motor is an ideal choice for preconstruction opportunities while the walls are open and operation with a wired switch is preferred.
Detachable power cable to easily manage wire length or replace if needed.
Standard control options include wired wall switches.
Easily set and adjust limits using rapid push-buttons.

Environmentally Friendly

Designed to save energy.
Doesn't consume power in standby mode.

Details and specifications

Dimension

Weight (with packaging) : 3 kg

Help me to sell

Energy Savings

Motorized rolling shutters can reduce heat gain in the summer and heat loss in the winter by up to 40%.
Motorized retractable awnings can reduce heat gain in the summer by 77% while in use.

Comfort & Convenience

One wired wall switch can control all your shutters or awnings to eliminate the need to go room to room to open or close them.
Features a compact manual override (CMO) allowing operation in the event of a power failure.

Safety

Create a physical and psychological barrier between potential intruders and the valuables inside your home.

Other documents & links

Installation information

Section Act for green

Technical information

Approval
UR

Standard
Protection Index	IP 44
Insulation class	Class I

Dimension
Unwrapped product weight	2.993 kg
Unwrapped length	787 mm
Unwrapped width	90 mm
Unwrapped height	100 mm
Minimum internal diameter	47 mm
External Diameter	45 mm
Diameter	50 mm
Riveting position distance	759 mm

Electrical
Consumption during operation	170 W
Consumption in standby mode	0 W
Minimum voltage	108 V
Maximum voltage	126 V
Rated current	1.5 A
Power supply	AC - RGE 2 - 120V/60HZ
Number of batteries	0

Mechanical
Speed	14 rpm
Torque	30 Nm
Type of limit switch unit	Mechanical
Capacity of the limit switch unit (turns)	34
Power scale	AC MOTOR MULTI PHASE 37,5W TO 750W
Repeatabilty	< +/- 5
Head type	CMO

Cable
Cable type	2464
Removable cable	Yes
Cable length	2 m
Cable color	WHITE
Number of wires of the cable	4
Wire section	0.75 mm²

Other
Minimum working temperature	-25 °C
Maximum working temperature	70 °C
Minimum storing temperature	-20 °C
Maximum storing temperature	80 °C
Thermical time	5 min
Shape	TUBULAR

Accessories

84 Product(s)

13mm Square Drive Shaft - 12mm OD for End Cap

Idler Bearing for 12mm Shaft

Universal Joint 7mm Hex to 8mm Square Connector

Standard Motor Tester Cable, 4-Wire

CMO Motor Cable - 12 ft.

LT50 Drive 70mm Rollerbat

LT50 Drive 80mm Rollerbat

U Shaped Idler Bracket

14mm Bearing Plate for Idler Bracket Kit

2" (47mm) Round Drive "Hard Clip"

LT50 Idler Bracket with 10mm Hole Nylon Bearing

CMO Awning Motor Bracket - U.S. Threads

Extension Shaft 7mm Hex L=330mm with Screw

Universal End Cap - Collapsible 12mm Shaft (for 2" (47mm) Round Tube)

Roller Tube End Cap with 12mm Hole

CMO Awning Override Shaft (100mm Long) with Geiger Eye

AMA/P71 LT50 Drive

CMO Awning Kit without Awning Eye

70mm LT50 Crown

Idler End Cap without Shaft 2.5" OD with M5 Screw

Connector Sleeve 7mm Hex to 7mm Hex

CMO Awning Override Shaft (170mm Long)

DS 78mm Round Drive

DS 85mm Round Drive

AMA/P71 LT50 Crown

60mm Octagonal LT50 Set

2.5" (60mm) Round Drive "Soft Clip"

4.0" Round LT50 Drive

Extension Shaft 7mm Hex L=220mm with Screw

2.5" (60mm) Round Crown

2.75" (67mm) Round Crown

70mm Octagonal LT50 Set

Intermediate Bearing Support for 1781018

3.5" Round LT50/60 Drive (89mm x 2mm)

Heavy Duty End Cap Shaft

Universal End Cap - Collapsible 10mm Shaft (for 2" (47mm) Round Tube)

Heavy Duty Idler Bracket with Idler End Cap Holder

DS 70 LT50 Crown

Drive Stop and Screw

CMO Motor Limit Setting Tool

2.5" (60mm) Round LT50 Set "Hard Clip"

70mm Octagonal LT50 Crown

LT50 Idler Bracket with 12mm Hole Nylon Bearing

Heavy Duty LT Intermediate Support Bracket

CMO Awning Override Shaft (100mm Long)

Anti-Blocking System (ABS) 500 Series Left Rotation

2.75" (67mm) Round LT50 Set "Hard Clip"

LT50 Crown 80mm Rollerbat

CMO Motor Cable - 24 ft.

Anti-Blocking System (ABS) 500 Series Right Rotation

SM65 (63mm) Round Crown - 3 grooves

DS 85mm Round Crown

60mm Octagonal Drive

SM65 (63mm) Round Drive

DS 78mm/R Round Drive

Modified LT60 DS 78 Drive (Key Way Widened)

CMO ME Awning Override Kit (U.S. Threads)

Sunea® RTS CMO Universal Bracket

Short Awning Override Shaft Ring

Nylon Ball Bearing 12mm ID for 1781030

Idler End Cap without Shaft 2.0" OD with M5 Screw

2.5" Round LT50 Drive "Hard Clip"

2" (47mm) Round Drive "Soft Clip"

DMI Bracket 100mm x 100mm

2.5" 60mm Octagonal Crown

70mm Octagonal Drive

DS 78mm/D Round Drive

13mm Sq. Intermediate Drive Shaft - 16mm OD for 9146011

Ball Support for 9410803 and 9028665

4-Conductor Motor Cable SJTW (Sold per Foot)

DS70 LT50 Set (0.8mm - 1mm Kit)

Connector Sleeve 7mm Hex to 8mm Square

CMO Awning Override Kit (U.S. Threads)

LT50 Crown 70mm Rollerbat

CMO Motor Cable - 6 ft.

Nylon ball bearing 10mm ID for 1781030

Nylon Ball Bearing and Holder with 12mm Hole for 9420604

DS 78mm Round Crown

DS 70mm Round Drive (0.8mm - 1mm)