Products

535A2 RTS CMO - 1047306 - 1 - Somfy

Act for green

535A2 RTS CMO - 1047306 - 1 - Somfy

Ref : 1047306 - 535A2 RTS CMO 35/20 SJTW 12 FT

535A2 RTS CMO

Motor with built-in RTS featuring a compact manual overide

LT50 RTS CMO tubular motors have RTS built-in and feature a compact manual override (CMO).

Applications
Awning / Rolling shutter
Embedded Technologies	Warranty
RTS	5 years

Product benefits

Easy to Install & Use

Premier choice for hurricane shutters and retractable awnings.
120V tubular motor with built-in RTS.
Features a compact manual override (CMO) which allows users to operate the motorized application manually when power is not available.
This motor can be plugged into a standard wall outlet or hard-wired.
Detachable power cable to easily manage wire length or replace if needed.
Easily integrates with most home automation systems.
Compatible with full range of RTS controls and accessories.
Easily set and adjust limits using rapid push-buttons.

Details and specifications

Dimension

Weight (with packaging) : 3.24 kg

Help me to sell

Energy Savings

Motorized rolling shutters can reduce heat gain in the summer and heat loss in the winter by up to 40%.
Motorized retractable awnings can reduce heat gain in the summer by 77% while in use.

Comfort & Convenience

Long range remote control doesn't require direct line of sight.
Remotely control RTS products from any mobile device.
Use natural voice commands to control RTS motorized solutions by adding TaHoma.
Easily integrates with most home automation systems.
Premier choice for hurricane shutters.
Features a compact manual overide (CMO) which allows you to operate the motorized application manually when power is not available.

Other documents & links

Installation information

Downloads & videos

Section Act for green

PEP ecopassport – LT50 CSI RTS - EN Download

Technical information

Approval
UR

Standard
Protection Index	IP 44
Insulation class	Class I

Dimension
Unwrapped product weight	1.469 kg
Unwrapped length	774 mm
Minimum internal diameter	47 mm
External Diameter	45 mm
Diameter	50 mm
Riveting position distance	759 mm

Technology
Radio Frequency	433.420 MHz
Number of channels	12
Range in open field	0.05 m
Coding	Rolling code 16 million of possibilities

Electrical
Consumption during operation	250 W
Consumption in standby mode	0 W
Minimum voltage	108 V
Maximum voltage	126 V
Rated current	2.1 A
Power supply	AC - RGE 2 - 120V/60HZ
Antenna	Integrated

Mechanical
Speed	20 rpm
Torque	35 Nm
Capacity of the limit switch unit (turns)	34
Power scale	AC MOTOR MULTI PHASE 37,5W TO 750W
Repeatabilty	+/- 5
Head type	CMO
Thermal tripping	140 °C

Cable
Cable type	SJTW
Removable cable	Yes
Cable length	3.5 m
Cable color	WHITE
Number of wires of the cable	3
Wire section	0.75 mm²

Other
Minimum working temperature	-25 °C
Maximum working temperature	70 °C
Minimum storing temperature	-20 °C
Maximum storing temperature	80 °C
Thermical time	5 min
Shape	TUBULAR

End Product
End product Width	5 mm

Accessories

81 Product(s)

LT50 CMO RTS Cable with 5-15P Right Angle NEMA Plug - 24 ft.

LT50 CMO RTS Cable with 5-15P Right Angle NEMA Plug - 18 ft.

CMO ME Awning Override Kit (U.S. Threads)

70mm LT50 Crown for Tube (with Groove)

2" (47mm) Round Drive "Soft Clip"

DS 85mm Round Crown

DS 78mm/R Round Drive

13mm Sq. Intermediate Drive Shaft - 16mm OD for 9146011

3-Conductor Motor Cable SJTW (Sold per Foot)

LT50 Drive 70mm Rollerbat

Nylon Ball Bearing 12mm ID for 1781030

Idler End Cap without Shaft 2.5" OD with M5 Screw

2.5" (60mm) Round Drive "Soft Clip"

CMO Awning Motor Bracket - U.S. Threads

Extension Shaft 7mm Hex L=330mm with Screw

Roller Tube End Cap with 12mm Hole

AMA/P71 LT50 Drive

70mm Octagonal Drive

DS 78mm/D Round Drive

Standard Motor Tester Cable, 4-Wire

60mm Octagonal LT50 Set

70mm Octagonal LT50 Crown

LT50 Crown 80mm Rollerbat

U Shaped Idler Bracket

14mm Bearing Plate for Idler Bracket Kit

3.5" Round LT50/60 Drive (89mm x 2mm)

Extension Shaft 7mm Hex L=220mm with Screw

2.5" (60mm) Round Crown

Idler Bearing for 12mm Shaft

2" (47mm) Round Drive "Hard Clip"

Heavy Duty End Cap Shaft

Heavy Duty Idler Bracket with Idler End Cap Holder

CMO Awning Override Shaft (170mm Long)

CMO Awning Override Shaft (100mm Long) with Geiger Eye

DS 78mm Round Drive

DS 85mm Round Drive

2.75" (67mm) Round LT50 Set "Hard Clip"

4.0" Round LT50 Drive

DMI Bracket 100mm x 100mm

2.75" (67mm) Round Crown

DS 70 LT50 Crown

SM65 (63mm) Round Drive

DS 70mm Round Drive (0.8mm - 1mm)

Universal Joint 7mm Hex to 8mm Square Connector

2.5" (60mm) Round LT50 Set "Hard Clip"

70mm Octagonal LT50 Set

LT50 Idler Bracket with 10mm Hole Nylon Bearing

Nylon ball bearing 10mm ID for 1781030

Heavy Duty LT Intermediate Support Bracket

Universal End Cap - Collapsible 12mm Shaft (for 2" (47mm) Round Tube)

CMO Awning Override Shaft (100mm Long)

60mm Octagonal Drive

Drive Stop and Screw

Ball Support for 9410803 and 9028665

LT50 CMO RTS Cable with 5-15P Right Angle NEMA Plug - 12 ft.

DS70 LT50 Set (0.8mm - 1mm Kit)

CMO Awning Override Kit (U.S. Threads)

LT50 Drive 80mm Rollerbat

LT50 CMO RTS SJTW 3C Cable - 10 ft.

LT50 CMO RTS SJTW 3C Cable - 24 ft.

Intermediate Bearing Support for 1781018

LT50 Idler Bracket with 12mm Hole Nylon Bearing

Universal End Cap - Collapsible 10mm Shaft (for 2" (47mm) Round Tube)

Nylon Ball Bearing and Holder with 12mm Hole for 9420604

Connector Sleeve 7mm Hex to 7mm Hex

2.5" 60mm Octagonal Crown

DS 78mm Round Crown

CMO Motor Limit Setting Tool

13mm Square Drive Shaft - 12mm OD for End Cap

Modified LT60 DS 78 Drive (Key Way Widened)

Short Awning Override Shaft Ring

LT50 Crown 70mm Rollerbat

Idler End Cap without Shaft 2.0" OD with M5 Screw

2.5" Round LT50 Drive "Hard Clip"

SM65 (63mm) Round Crown - 3 grooves

AMA/P71 LT50 Crown

Last consulted articles