Products

550R2 RTS CMO - 1051466 - 1 - Somfy

Act for green

550R2 RTS CMO - 1051466 - 1 - Somfy

Ref : 1051466 - 550R2 RTS CMO 50/14SJTW 10FT U

550R2 RTS CMO

Motor with built-in RTS featuring a compact manual overide

LT50 RTS CMO tubular motors have RTS built-in and feature a compact manual override (CMO).

Applications
Awning / Rolling shutter
Embedded Technologies	Warranty
RTS	5 years

Product benefits

Easy to Install & Use

Premier choice for hurricane shutters and retractable awnings.
120V tubular motor with built-in RTS.
Features a compact manual override (CMO) which allows users to operate the motorized application manually when power is not available.
This motor can be plugged into a standard wall outlet or hard-wired.
Detachable power cable to easily manage wire length or replace if needed.
Easily integrates with most home automation systems.
Compatible with full range of RTS controls and accessories.
Easily set and adjust limits using rapid push-buttons.

Details and specifications

Help me to sell

Energy Savings

Motorized rolling shutters can reduce heat gain in the summer and heat loss in the winter by up to 40%.
Motorized retractable awnings can reduce heat gain in the summer by 77% while in use.

Comfort & Convenience

Long range remote control doesn't require direct line of sight.
Remotely control RTS products from any mobile device.
Use natural voice commands to control RTS motorized solutions by adding TaHoma.
Easily integrates with most home automation systems.
Premier choice for hurricane shutters.
Features a compact manual overide (CMO) which allows you to operate the motorized application manually when power is not available.

Other documents & links

Installation information

Downloads & videos

Section Act for green

PEP ecopassport – LT50 CSI RTS - EN Download

Technical information

Approval

Standard
Protection Index	IP 44
Insulation class	Class I

Dimension
Unwrapped length	787 mm
Unwrapped width	90 mm
Unwrapped height	100 mm
Minimum internal diameter	47 mm
External Diameter	45 mm
Diameter	50 mm
Riveting position distance	759 mm

Technology
Radio Frequency	433.420 MHz
Number of channels	12
Range in open field	200 m
Memory capacity	12
Coding	Rolling code 16 million of possibilities

Electrical
Consumption during operation	250 W
Consumption in standby mode	0 W
Minimum voltage	108 V
Maximum voltage	126 V
Rated current	2.1 A
Power supply	AC - RGE 2 - 120V/60HZ
Antenna	Integrated

Mechanical
Speed	14 rpm
Torque	50 Nm
Type of limit switch unit	Electronic
Capacity of the limit switch unit (turns)	34
Power scale	AC MOTOR MULTI PHASE 37,5W TO 750W
Repeatabilty	+/- 5
Head type	CMO
Thermal tripping	140 °C

Cable
Cable type	SJTW
Removable cable	Yes
Cable length	3 m
Cable color	WHITE
Number of wires of the cable	3
Wire section	0.75 mm²

Other
Minimum working temperature	-25 °C
Maximum working temperature	70 °C
Minimum storing temperature	-20 °C
Maximum storing temperature	80 °C
Thermical time	5 min
Shape	TUBULAR

Accessories

85 Product(s)

Universal Joint 7mm Hex to 8mm Square Connector

LT50 CMO RTS Cable with 5-15P Right Angle NEMA Plug - 12 ft.

LT50 CMO RTS Cable with 5-15P Right Angle NEMA Plug - 18 ft.

70mm LT50 Crown for Tube (with Groove)

LT50 Drive 80mm Rollerbat

Idler End Cap without Shaft 2.5" OD with M5 Screw

Universal End Cap - Collapsible 10mm Shaft (Shorter Pin than Item 9420800)

Nylon Ball Bearing and Holder with 12mm Hole for 9420604

Connector Sleeve 7mm Hex to 7mm Hex

Roller Tube End Cap with 12mm Hole

Anti-Blocking System (ABS) 500 Series Right Rotation

DS 85mm Round Crown

SM65 (63mm) Round Drive

DS 70mm Round Drive (0.8mm - 1mm)

AMA/P71 LT50 Drive

DS 78mm/R Round Drive

3-Conductor Motor Cable SJTW (Sold per Foot)

LT50 CMO RTS Cable with 5-15P Right Angle NEMA Plug - 24 ft.

CMO ME Awning Override Kit (U.S. Threads)

Nylon Ball Bearing 12mm ID for 1781030

Heavy Duty LT Intermediate Support Bracket

CMO Awning Override Shaft (100mm Long)

SM65 (63mm) Round Crown - 3 grooves

60mm Octagonal Drive

AMA/P71 LT50 Crown

Modified LT60 DS 78 Drive (Key Way Widened)

70mm Octagonal LT50 Crown

LT50 Crown 70mm Rollerbat

Idler End Cap without Shaft 2.0" OD with M5 Screw

Intermediate Bearing Support for 1781018

2.5" Round LT50 Drive "Hard Clip"

2" (47mm) Round Drive "Hard Clip"

LT50 Idler Bracket with 12mm Hole Nylon Bearing

Nylon ball bearing 10mm ID for 1781030

Heavy Duty End Cap Shaft

Heavy Duty Idler Bracket with Idler End Cap Holder

Anti-Blocking System (ABS) 500 Series Left Rotation

Drive Stop and Screw

Ball Support for 9410803 and 9028665

2.75" (67mm) Round LT50 Set "Hard Clip"

DS70 LT50 Set (0.8mm - 1mm Kit)

CMO Awning Override Kit (U.S. Threads)

LT50 CMO RTS SJTW 3C Cable - 10 ft.

Extension Shaft 7mm Hex L=220mm with Screw

Universal End Cap - Collapsible 10mm Shaft (for 2" (47mm) Round Tube)

DMI Bracket 100mm x 100mm

2.5" (60mm) Round Crown

2.75" (67mm) Round Crown

DS 70 LT50 Crown

Idler Bearing for 12mm Shaft

2.5" (60mm) Round LT50 Set "Hard Clip"

70mm Octagonal LT50 Set

2" (47mm) Round Drive "Soft Clip"

CMO Awning Motor Bracket - U.S. Threads

Universal End Cap - Collapsible 12mm Shaft (for 2" (47mm) Round Tube)

CMO Awning Override Shaft (100mm Long) with Geiger Eye

DS 78mm Round Drive

DS 85mm Round Drive

Standard Motor Tester Cable, 4-Wire

LT50 Drive 70mm Rollerbat

LT50 Crown 80mm Rollerbat

14mm Bearing Plate for Idler Bracket Kit

LT50 Idler Bracket with 10mm Hole Nylon Bearing

4.0" Round LT50 Drive

Heavy Duty Angle Bracket for 9430610

Extension Shaft 7mm Hex L=330mm with Screw

Short Awning Override Shaft Ring

LT50 CMO RTS SJTW 3C Cable - 24 ft.

CMO Awning Override Shaft (170mm Long)

CMO Motor Limit Setting Tool

13mm Square Drive Shaft - 12mm OD for End Cap

13mm Sq. Intermediate Drive Shaft - 16mm OD for 9146011

60mm Octagonal LT50 Set

U Shaped Idler Bracket

2.5" (60mm) Round Drive "Soft Clip"

3.5" Round LT50/60 Drive (89mm x 2mm)

2.5" 60mm Octagonal Crown

DS 78mm Round Crown

70mm Octagonal Drive

DS 78mm/D Round Drive