Products
Ref : 1051476 - 530R2 RTS CMO 30/14SJTW 10FT U
530R2 RTS CMO
Motor with built-in RTS featuring a compact manual overide
LT50 RTS CMO tubular motors have RTS built-in and feature a compact manual override (CMO).
| Applications | ||
|---|---|---|
| Awning / Rolling shutter | ||
| Embedded Technologies | Warranty | |
| RTS | 5 years | |
Product benefits
Easy to Install & Use
- Premier choice for hurricane shutters and retractable awnings.
- 120V tubular motor with built-in RTS.
- Features a compact manual override (CMO) which allows users to operate the motorized application manually when power is not available.
- This motor can be plugged into a standard wall outlet or hard-wired.
- Detachable power cable to easily manage wire length or replace if needed.
- Easily integrates with most home automation systems.
- Compatible with full range of RTS controls and accessories.
- Easily set and adjust limits using rapid push-buttons.
Details and specifications
Energy Savings
- Motorized rolling shutters can reduce heat gain in the summer and heat loss in the winter by up to 40%.
- Motorized retractable awnings can reduce heat gain in the summer by 77% while in use.
Comfort & Convenience
- Long range remote control doesn't require direct line of sight.
- Remotely control RTS products from any mobile device.
- Use natural voice commands to control RTS motorized solutions by adding TaHoma.
- Easily integrates with most home automation systems.
- Premier choice for hurricane shutters.
- Features a compact manual overide (CMO) which allows you to operate the motorized application manually when power is not available.
Other documents & links
Installation information
Downloads & videos
- How to Remove a Control Point From a Somfy Radio Motor View
- How to Add an Additional Radio Control Point to a Somfy Radio Motor View
- How to Add a Multi-Channel Control Point to a Somfy Radio Motor View
- How to Add a Telis 16 RTS to a Somfy RTS motor View
- How to Set The End Limits of a Somfy Wired Roller Shutter Motor View
Section Act for green
Technical information
| Approval |
|---|
|
Standard |
|
|---|---|
| Protection Index | IP 44 |
| Insulation class | Class I |
Dimension |
|
|---|---|
| Unwrapped length | 787 mm |
| Unwrapped width | 90 mm |
| Unwrapped height | 100 mm |
| Minimum internal diameter | 47 mm |
| External Diameter | 45 mm |
| Diameter | 50 mm |
| Riveting position distance | 759 mm |
Technology |
|
|---|---|
| Radio Frequency | 433.42 MHz |
| Number of channels | 12 |
| Range in open field | 0.05 m |
| Memory capacity | 12 |
| Coding | Rolling code 16 million of possibilities |
Electrical |
|
|---|---|
| Consumption during operation | 170 W |
| Consumption in standby mode | 0 W |
| Minimum voltage | 108 V |
| Maximum voltage | 126 V |
| Rated current | 1.5 A |
| Power supply | AC - RGE 2 - 120V/60HZ |
| Antenna | Integrated |
Mechanical |
|
|---|---|
| Speed | 14 rpm |
| Torque | 30 Nm |
| Type of limit switch unit | Quick limit switch |
| Capacity of the limit switch unit (turns) | 34 |
| Power scale | AC MOTOR MULTI PHASE 37,5W TO 750W |
| Repeatabilty | +/- 5 |
| Head type | CMO |
| Thermal tripping | 140 °C |
Cable |
|
|---|---|
| Cable type | SJTW |
| Removable cable | Yes |
| Cable length | 3 m |
| Cable color | WHITE |
| Number of wires of the cable | 3 |
| Cable plug ends | STRIPPED |
| Wire section | 0.75 mm² |
Other |
|
|---|---|
| Minimum working temperature | -25 °C |
| Maximum working temperature | 70 °C |
| Minimum storing temperature | -20 °C |
| Maximum storing temperature | 80 °C |
| Thermical time | 5 min |
| Shape | TUBULAR |
Accessories
86 Product(s)
13mm Sq. Intermediate Drive Shaft - 16mm OD for 9146011
Réf. 1781018
DS 74 LT50 Set
Réf. 9012238
CMO ME Awning Override Kit (U.S. Threads)
Réf. 9012349
Idler End Cap without Shaft 2.0" OD with M5 Screw
Réf. 9129631
CMO Awning Motor Bracket - U.S. Threads
Réf. 9420648
CMO Awning Override Shaft (100mm Long) with Geiger Eye
Réf. 9707287
DS 78mm/R Round Drive
Réf. 9761005
13mm Square Drive Shaft - 12mm OD for End Cap
Réf. 1781009
Universal Joint 7mm Hex to 8mm Square Connector
Réf. 2005416
Modified LT60 DS 78 Drive (Key Way Widened)
Réf. 9012241
70mm Octagonal LT50 Crown
Réf. 9012328
CMO Awning Override Kit (U.S. Threads)
Réf. 9012348
Short Awning Override Shaft Ring
Réf. 9016332
LT50 Crown 70mm Rollerbat
Réf. 9026982
2.5" Round LT50 Drive "Hard Clip"
Réf. 9206019
SM65 (63mm) Round Crown - 3 grooves
Réf. 9707030
DS 85mm Round Crown
Réf. 9707035
AMA/P71 LT50 Crown
Réf. 9997118
LT50 CMO RTS Cable with 5-15P Right Angle NEMA Plug - 12 ft.
Réf. 9012148
P72 LT50 Set
Réf. 9012235
70mm LT50 Crown
Réf. 9016298
LT50 CMO RTS SJTW 3C Cable - 24 ft.
Réf. 9021047
2.5" (60mm) Round Drive "Soft Clip"
Réf. 9206041
CMO Awning Override Shaft (100mm Long)
Réf. 9685148
70mm Octagonal Drive
Réf. 9761002
DS 78mm/D Round Drive
Réf. 9761004
Ball Support for 9410803 and 9028665
Réf. 1781030
Standard Motor Tester Cable, 4-Wire
Réf. 9012116
2.75" (67mm) Round LT50 Set "Hard Clip"
Réf. 9012232
DS70 LT50 Set (0.8mm - 1mm Kit)
Réf. 9012237
LT50 Drive 80mm Rollerbat
Réf. 9019556
LT50 CMO RTS SJTW 3C Cable - 10 ft.
Réf. 9021025
14mm Bearing Plate for Idler Bracket Kit
Réf. 9146007
Extension Shaft 7mm Hex L=220mm with Screw
Réf. 9420657
Heavy Duty End Cap Shaft
Réf. 9420674
Connector Sleeve 7mm Hex to 7mm Hex
Réf. 9685120
2.5" (60mm) Round Crown
Réf. 9707026
DS 78mm Round Drive
Réf. 9761001
DS 85mm Round Drive
Réf. 9761003
P72 LT50 Drive
Réf. 9761011
LT50 CMO RTS Cable with 5-15P Right Angle NEMA Plug - 24 ft.
Réf. 9012149
2.5" (60mm) Round LT50 Set "Hard Clip"
Réf. 9012231
70mm Octagonal LT50 Set
Réf. 9012234
2" (47mm) Round Drive "Soft Clip"
Réf. 9206089
LT50 Idler Bracket with 10mm Hole Nylon Bearing
Réf. 9410635
Nylon ball bearing 10mm ID for 1781030
Réf. 9410803
Heavy Duty Angle Bracket for 9430610
Réf. 9420604
Heavy Duty LT Intermediate Support Bracket
Réf. 9420673
Anti-Blocking System (ABS) 500 Series Right Rotation
Réf. 9705414
2.75" (67mm) Round Crown
Réf. 9707031
60mm Octagonal Drive
Réf. 9751001
SM65 (63mm) Round Drive
Réf. 9751002
Drive Stop and Screw
Réf. 9910004
Idler Bearing for 12mm Shaft
Réf. 1781015
U Shaped Idler Bracket
Réf. 9127808
2" (47mm) Round Drive "Hard Clip"
Réf. 9206088
Universal End Cap - Collapsible 12mm Shaft (for 2" (47mm) Round Tube)
Réf. 9420801
Heavy Duty Idler Bracket with Idler End Cap Holder
Réf. 9430603
CMO Awning Override Shaft (170mm Long)
Réf. 9685136
Anti-Blocking System (ABS) 500 Series Left Rotation
Réf. 9705415
CMO ME Bracket
Réf. 9910041
3-Conductor Motor Cable SJTW (Sold per Foot)
Réf. 9012111
LT50 CMO RTS Cable with 5-15P Right Angle NEMA Plug - 18 ft.
Réf. 9012150
CMO Awning Kit without Awning Eye
Réf. 9012362
Nylon Ball Bearing 12mm ID for 1781030
Réf. 9028665
Idler End Cap without Shaft 2.5" OD with M5 Screw
Réf. 9129632
4.0" Round LT50 Drive
Réf. 9420304
Universal End Cap - Collapsible 10mm Shaft (for 2" (47mm) Round Tube)
Réf. 9420800
Nylon Ball Bearing and Holder with 12mm Hole for 9420604
Réf. 9430610
Roller Tube End Cap with 12mm Hole
Réf. 9701288
DMI Bracket 100mm x 100mm
Réf. 9706034
DS 70 LT50 Crown
Réf. 9707034
DS 70mm Round Drive (0.8mm - 1mm)
Réf. 9751005
60mm Octagonal LT50 Set
Réf. 9012233
DS 78 LT50 Set
Réf. 9012239
LT50 Drive 70mm Rollerbat
Réf. 9016059
LT50 Crown 80mm Rollerbat
Réf. 9019555
Intermediate Bearing Support for 1781018
Réf. 9146011
LT50 Idler Bracket with 12mm Hole Nylon Bearing
Réf. 9410633
3.5" Round LT50/60 Drive (89mm x 2mm)
Réf. 9420303
Extension Shaft 7mm Hex L=330mm with Screw
Réf. 9420659
Universal End Cap - Collapsible 10mm Shaft (Shorter Pin than Item 9420800)
Réf. 9420814
2.5" 60mm Octagonal Crown
Réf. 9707025
DS 78mm Round Crown
Réf. 9707027
AMA/P71 LT50 Drive
Réf. 9751015
CMO Motor Limit Setting Tool
Réf. 9910019