< Products

DMI5 20Nm 12rpm 120V - 2000773 - 1 - Somfy Act for green

Ref : 2000773 - DMI5 20/12 120/60 C2,5M WHITE/

DMI5 20Nm 12rpm 120V

MOTOR DMI5 20NM/12RPM-120/60-C2,5M WHITE

Applications
Awning / Rolling shutter
Embedded Technologies Warranty
Wired 5 years

Other documents & links

Section Act for green

Technical information

Standard
Protection Index IP 44  
Insulation class Class I  

Dimension
Unwrapped length 617 mm  
Unwrapped width 92 mm  
Unwrapped height 92 mm  
Minimum internal diameter 47 mm  
External Diameter 45 mm  
Diameter 50 mm  
Riveting position distance 576 mm  

Electrical
Consumption during operation 130 W  
Consumption in standby mode 0 W  
Minimum voltage 108 V  
Maximum voltage 126 V  
Rated current 1.1 A  
Power supply AC - RGE 2 - 120V/60HZ  

Mechanical
Speed 12 rpm  
Torque 20 Nm  
Type of limit switch unit Mechanical  
Capacity of the limit switch unit (turns) 28  
Power scale AC MOTOR SINGLE PHASE 37,5W TO 750W  
Repeatabilty +/- 5  
Head type CMO  

Cable
Cable type VVF  
Cable length 2.5 m  
Cable color WHITE  
Number of wires of the cable 4  
Cable plug ends STRIPPED  
Wire section 0.75 mm²  

Other
Minimum working temperature -20 °C  
Maximum working temperature 70 °C  
Minimum storing temperature -20 °C  
Maximum storing temperature 80 °C  
Thermical time 5 min  
Noise level (dB) 48 dB  

Accessories

58 Product(s)
DS 85mm Round Crown
Réf. 9707035
Steel Ball Bearing for idlers with 10mm pin
Réf. 2003600
DS 78 LT50 Set
Réf. 9012239
T5 60mm Octagonal Aluminum drive wheel
Réf. 9012814
T5/T6 60mm Round Drive Aluminum
Réf. 9012950
Short Awning Override Shaft Ring
Réf. 9016332
Nylon Ball Bearing 12mm ID for 1781030
Réf. 9028665
T5 70mm Round (Simbac Tube) Crown
Réf. 9128424
DMI Bracket 1 piece round adjustable plate
Réf. 9420654
Extension Shaft 7mm Hex L=330mm with Screw
Réf. 9420659
DMI Bracket 2 piece inside mount
Réf. 9520074
SM65 (63mm) Round Crown - 3 grooves
Réf. 9707030
AMA/P71 LT50 Drive
Réf. 9751015
Take-Up Reel for 2" Tube
Réf. 1781151
Nylon Bearing for idlers with 10mm pin
Réf. 2003599
T5 60mm Octagonal Aluminum
Réf. 9012951
2" (47mm) Round Drive "Hard Clip"
Réf. 9206088
T5 71mm Round (Perma)
Réf. 9521010
DMI Bracket 100mm x 100mm
Réf. 9706034
70mm Octagonal Drive
Réf. 9761002
DMI Bracket 2 piece inside mount adjustable U
Réf. 2005701
T5 60mm Round Aluminum drive wheel
Réf. 9012813
2" (47mm) Round Drive "Soft Clip"
Réf. 9206089
Nylon ball bearing 10mm ID for 1781030
Réf. 9410803
T5/T6 85mm Round (Simbac Tube)
Réf. 9420300
DMI Bracket 1 piece round adjustable cast plate
Réf. 9420647
T5 60mm Octagonal
Réf. 9521031
T5 50mm Octagonal
Réf. 9521054
2.5" (60mm) Round Crown
Réf. 9707026
Ball Support for 9410803 and 9028665
Réf. 1781030
Universal Joint 7mm Hex to 8mm Square Connector
Réf. 2005416
Standard Motor Tester Cable, 4-Wire
Réf. 9012116
Connector Sleeve 7mm Hex to 8mm Square
Réf. 9012323
Extension Shaft 7mm Hex L=220mm with Screw
Réf. 9420657
Universal End Cap - Collapsible 12mm Shaft (for 2" (47mm) Round Tube)
Réf. 9420801
T5 85mm Round
Réf. 9521008
T5 70mm Octagonal Crown
Réf. 9521046
Connector Sleeve 7mm Hex to 7mm Hex
Réf. 9685120
60mm Octagonal Drive
Réf. 9751001
DMI Bracket 3 piece outside mount
Réf. 9520079
T6 60mm Round
Réf. 9521028
DS 78mm Round Drive
Réf. 9761001
DS 85mm Round Drive
Réf. 9761003
T5/T6 70mm OCTAGONAL Aluminum
Réf. 9011878
107mm Sleeve Adaptor (Adaptor Set / Differential required for use)
Réf. 9012817
T5/T6 67mm ROUND
Réf. 9206028
2.5" (60mm) Round Drive "Soft Clip"
Réf. 9206041
T5 70mm Round (Simbac Tube) Drive Wheel
Réf. 9521000
T5 70mm Octagonal Drive Wheel
Réf. 9521021
2.75" (67mm) Round Crown
Réf. 9707031
SM65 (63mm) Round Drive
Réf. 9751002
DS 70mm Round Drive (0.8mm - 1mm)
Réf. 9751005
T5 70mm Octagonal Aluminum drive wheel
Réf. 9012812
Universal End Cap - Collapsible 10mm Shaft (for 2" (47mm) Round Tube)
Réf. 9420800
T5 85mm Round (Simbac Tube)
Réf. 9521044
2.5" 60mm Octagonal Crown
Réf. 9707025
DS 78mm Round Crown
Réf. 9707027
Drive Stop and Screw
Réf. 9910004