< Products

DMI6 80Nm 14rpm 120V - 2001042 - 1 - Somfy Act for green

Ref : 2001042 - DMI6 80/14 120/60 C2,5M WHITE/

DMI6 80Nm 14rpm 120V

MOTOR DMI 6 80NM/14RPM 120/60 2,5M WHITE

Applications
Awning / Rolling shutter
Embedded Technologies Warranty
Wired 5 years

Other documents & links

Section Act for green

Technical information

Approval
UR

Standard
Protection Index IP 44  
Insulation class Class I  

Dimension
Unwrapped length 704 mm  
Unwrapped width 92 mm  
Unwrapped height 92 mm  
Minimum internal diameter 60 mm  
External Diameter 58 mm  
Diameter 60 mm  
Riveting position distance 662 mm  

Electrical
Consumption during operation 390 W  
Consumption in standby mode 0 W  
Minimum voltage 108 V  
Maximum voltage 126 V  
Rated current 3.4 A  
Power supply AC - RGE 2 - 120V/60HZ  

Mechanical
Speed 14 rpm  
Torque 80 Nm  
Type of limit switch unit Mechanical  
Capacity of the limit switch unit (turns) 34  
Power scale AC MOTOR SINGLE PHASE 37,5W TO 750W  
Repeatabilty < +/- 5  
Head type CMO  

Cable
Cable type VVF  
Cable length 2.5 m  
Cable color WHITE  
Number of wires of the cable 4  
Cable plug ends STRIPPED  
Wire section 0.75 mm²  

Other
Minimum working temperature -20 °C  
Maximum working temperature -10 °C  
Minimum storing temperature -25 °C  
Maximum storing temperature -60 °C  
Thermical time 4 min  
Noise level (dB) 66 dB  

Accessories

43 Product(s)
Universal Joint 7mm Hex to 8mm Square Connector
Réf. 2005416
T5/T6 70mm OCTAGONAL Aluminum
Réf. 9011878
Standard Motor Tester Cable, 4-Wire
Réf. 9012116
T6-8-9 280X280 Motor side wall plate
Réf. 9017157
T6-8-9 330X330 Idler side wall plate
Réf. 9017168
Extension Shaft 7mm Hex L=220mm with Screw
Réf. 9420657
T6 85mm Round (Simbac Tube)
Réf. 9530109
97mm Idle Insert
Réf. 9542009
Connector Sleeve 7mm Hex to 7mm Hex
Réf. 9685120
LT60 Crown 80mm Rollerbat
Réf. 9019557
DMI Bracket 3 piece outside mount
Réf. 9520079
T6 70mm Octagonal
Réf. 9530117
T6 85mm Round (Simbac Tube) Crown
Réf. 9690085
Idler Support
Réf. 2003807
107mm Sleeve Adaptor (Adaptor Set / Differential required for use)
Réf. 9012817
LT60 Drive 80mm Rollerbat
Réf. 9019558
T5/T6 67mm ROUND
Réf. 9206028
2.5" (60mm) Round Drive "Soft Clip"
Réf. 9206041
T6 94mm Round
Réf. 9530124
DS 78mm Round Crown
Réf. 9707639
DS 78mm/R Round Drive
Réf. 9761005
94mm Idle Insert
Réf. 9542008
78mm Round Crown
Réf. 9707640
70mm Octagonal Drive
Réf. 9761002
DS 78mm/D Round Drive
Réf. 9761004
2.75" (67mm) Round Crown
Réf. 9420342
Extension Shaft 7mm Hex L=330mm with Screw
Réf. 9420659
T6 Differential 60mm round
Réf. 9001407
T5/T6 60mm Round Drive Aluminum
Réf. 9012950
Short Awning Override Shaft Ring
Réf. 9016332
T6 70mm Octagonal Aluminum drive wheel
Réf. 9018630
DMI Bracket 1 piece round adjustable plate
Réf. 9420654
DMI Bracket 2 piece inside mount
Réf. 9520074
T6 78mm Round
Réf. 9530107
T6-8-9 280X280 Idler side wall plate
Réf. 9017166
70mm Octagonal LT60 Crown
Réf. 9705340
DMI Bracket 100mm x 100mm
Réf. 9706034
DMI Bracket 2 piece inside mount adjustable U
Réf. 2005701
T6-8-9 330X330 Motor side wall plate
Réf. 9017158
Vertical wall angle bracket for side plates 9017157 and 9017166
Réf. 9017172
T5/T6 85mm Round (Simbac Tube)
Réf. 9420300
DMI Bracket 1 piece round adjustable cast plate
Réf. 9420647
T6 Drive Stop & Screw
Réf. 9910062