Products
Ref : 2004675 - DMI5 HZ01 50/12 120/60 C6M WHI
DMI5Hz 50Nm 12rpm 120V
DMI5HZ 50/12 120/60 2,5M WHITE /1
| Applications | ||
|---|---|---|
| Awning / Rolling shutter | ||
| Embedded Technologies | Warranty | |
| Hz | 5 years | |
Other documents & links
Section Act for green
Technical information
| Approval |
|---|
|
Standard |
|
|---|---|
| Protection Index | IP 44 |
| Insulation class | Class I |
Dimension |
|
|---|---|
| Unwrapped length | 797 mm |
| Unwrapped width | 92 mm |
| Unwrapped height | 92 mm |
| Diameter | 50 mm |
| Riveting position distance | 756 mm |
Technology |
|
|---|---|
| Radio Frequency | 433.420 MHz |
| Coding | Rolling code 16 million of possibilities |
Electrical |
|
|---|---|
| Consumption during operation | 250 W |
| Consumption in standby mode | 0.34 W |
| Minimum voltage | 108 V |
| Maximum voltage | 126 V |
| Rated current | 2.1 A |
| Power supply | AC - RGE 2 - 120V/60HZ |
| Antenna | Integrated |
Mechanical |
|
|---|---|
| Speed | 12 rpm |
| Torque | 50 Nm |
| Type of limit switch unit | Mechanical |
| Capacity of the limit switch unit (turns) | 28 |
| Power scale | AC MOTOR SINGLE PHASE 37,5W TO 750W |
| Head type | CMO |
Cable |
|
|---|---|
| Cable type | SJTW |
| Cable length | 6 m |
| Cable color | WHITE |
| Number of wires of the cable | 3 |
| Wire section | 0.75 mm² |
Other |
|
|---|---|
| Minimum working temperature | -20 °C |
| Maximum working temperature | 60 °C |
| Thermical time | 4 min |
Accessories
56 Product(s)
Steel Ball Bearing for idlers with 10mm pin
Réf. 2003600
Standard Motor Tester Cable, 4-Wire
Réf. 9012116
DS 78 LT50 Set
Réf. 9012239
T5/T6 85mm Round (Simbac Tube)
Réf. 9420300
DMI Bracket 1 piece round adjustable cast plate
Réf. 9420647
T5 60mm Octagonal
Réf. 9521031
T5 50mm Octagonal
Réf. 9521054
2.5" (60mm) Round Crown
Réf. 9707026
AMA/P71 LT50 Drive
Réf. 9751015
DS 78mm Round Drive
Réf. 9761001
DS 85mm Round Drive
Réf. 9761003
Nylon Bearing for idlers with 10mm pin
Réf. 2003599
T5 60mm Octagonal Aluminum
Réf. 9012951
2" (47mm) Round Drive "Hard Clip"
Réf. 9206088
Extension Shaft 7mm Hex L=220mm with Screw
Réf. 9420657
Universal End Cap - Collapsible 12mm Shaft (for 2" (47mm) Round Tube)
Réf. 9420801
DMI Bracket 2 piece inside mount
Réf. 9520074
T5 85mm Round
Réf. 9521008
Take-Up Reel for 2" Tube
Réf. 1781151
T5/T6 60mm Round Drive Aluminum
Réf. 9012950
Nylon Ball Bearing 12mm ID for 1781030
Réf. 9028665
T5 70mm Round (Simbac Tube) Crown
Réf. 9128424
2.5" (60mm) Round Drive "Soft Clip"
Réf. 9206041
2" (47mm) Round Drive "Soft Clip"
Réf. 9206089
70mm Octagonal Drive
Réf. 9761002
DMI Bracket 2 piece inside mount adjustable U
Réf. 2005701
T5 60mm Round Aluminum drive wheel
Réf. 9012813
T5 60mm Octagonal Aluminum drive wheel
Réf. 9012814
DMI Bracket 1 piece round adjustable plate
Réf. 9420654
Extension Shaft 7mm Hex L=330mm with Screw
Réf. 9420659
Connector Sleeve 7mm Hex to 7mm Hex
Réf. 9685120
2.5" 60mm Octagonal Crown
Réf. 9707025
DS 78mm Round Crown
Réf. 9707027
Ball Support for 9410803 and 9028665
Réf. 1781030
Universal Joint 7mm Hex to 8mm Square Connector
Réf. 2005416
T5/T6 70mm OCTAGONAL Aluminum
Réf. 9011878
107mm Sleeve Adaptor (Adaptor Set / Differential required for use)
Réf. 9012817
Short Awning Override Shaft Ring
Réf. 9016332
T5/T6 67mm ROUND
Réf. 9206028
DMI Bracket 3 piece outside mount
Réf. 9520079
T5 70mm Round (Simbac Tube) Drive Wheel
Réf. 9521000
T5 70mm Octagonal Drive Wheel
Réf. 9521021
T5 70mm Octagonal Crown
Réf. 9521046
SM65 (63mm) Round Crown - 3 grooves
Réf. 9707030
DS 85mm Round Crown
Réf. 9707035
T5 70mm Octagonal Aluminum drive wheel
Réf. 9012812
Nylon ball bearing 10mm ID for 1781030
Réf. 9410803
2.75" (67mm) Round Crown
Réf. 9707031
60mm Octagonal Drive
Réf. 9751001
SM65 (63mm) Round Drive
Réf. 9751002
Universal End Cap - Collapsible 10mm Shaft (for 2" (47mm) Round Tube)
Réf. 9420800
T5 71mm Round (Perma)
Réf. 9521010
T6 60mm Round
Réf. 9521028
DMI Bracket 100mm x 100mm
Réf. 9706034
DS 70mm Round Drive (0.8mm - 1mm)
Réf. 9751005
Drive Stop and Screw
Réf. 9910004