Products
T6Hz 100Nm 14rpm 120V
Ref : 2006062 - T6HZ02 100/14 120/60 C2,5M WHI
T6Hz 100Nm 14rpm 120V
T6HZ02 100/14 120/60 C2.5M WHITE
| Applications | ||
|---|---|---|
| Awning / Rolling shutter | ||
| Embedded Technologies | Warranty | |
| Hz | 5 years | |
Technical information
Standard |
|
|---|---|
| Protection Index | IP 44 |
| Insulation class | Class I |
Dimension |
|
|---|---|
| Unwrapped length | 758 mm |
| Unwrapped width | 78 mm |
| Unwrapped height | 55 mm |
| Minimum internal diameter | 60 mm |
| External Diameter | 57 mm |
| Diameter | 60 mm |
| Riveting position distance | 716 mm |
Technology |
|
|---|---|
| Radio Frequency | 433.420 MHz |
| Range in open field | 150 m |
| Coding | Rolling code 16 million of possibilities |
Electrical |
|
|---|---|
| Consumption during operation | 430 W |
| Consumption in standby mode | 0.38 W |
| Minimum voltage | 108 V |
| Maximum voltage | 126 V |
| Rated current | 3.8 A |
| Power supply | AC - RGE 2 - 120V/60HZ |
| Antenna | Integrated |
Mechanical |
|
|---|---|
| Speed | 14 rpm |
| Torque | 100 Nm |
| Type of limit switch unit | Electronic |
| Capacity of the limit switch unit (turns) | 42 |
| Power scale | AC MOTOR SINGLE PHASE 37,5W TO 750W |
| Repeatabilty | < +/- 3 |
| Head type | ROUND WITH PINS |
Cable |
|
|---|---|
| Cable type | VVF |
| Cable length | 2.5 m |
| Cable color | WHITE |
| Number of wires of the cable | 3 |
| Cable plug ends | STRIPPED |
| Wire section | 0.75 mm² |
Other |
|
|---|---|
| Minimum working temperature | -20 °C |
| Maximum working temperature | 40 °C |
| Minimum storing temperature | -20 °C |
| Maximum storing temperature | 60 °C |
| Thermical time | 5 min |
| Noise level (dB) | 52 dB |
Accessories
36 Product(s)
T6-8-9 330X330 Idler side wall plate
Réf. 9017168
LT60 Crown 80mm Rollerbat
Réf. 9019557
2.75" (67mm) Round Crown
Réf. 9420342
70mm Octagonal LT60 Crown
Réf. 9705340
78mm Round Crown
Réf. 9707640
70mm Octagonal Drive
Réf. 9761002
DS 78mm/D Round Drive
Réf. 9761004
107mm Sleeve Adaptor (Adaptor Set / Differential required for use)
Réf. 9012817
LT60 Drive 80mm Rollerbat
Réf. 9019558
T5/T6 67mm ROUND
Réf. 9206028
T6 Operator Bracket 46mm counter sunk
Réf. 9530051
T6 85mm Round (Simbac Tube) Crown
Réf. 9690085
DS 78mm Round Crown
Réf. 9707639
T6 Fitting Kit
Réf. 9856000
Idler Support
Réf. 2003807
T6 Operator Bracket 100mm x 100mm square
Réf. 9530018
T6 70mm Octagonal
Réf. 9530117
DS 78mm/R Round Drive
Réf. 9761005
T6-8-9 280X280 Motor side wall plate
Réf. 9017157
T6-8-9 280X280 Idler side wall plate
Réf. 9017166
T6 Operator Bracket 48mm x 1/4
Réf. 9530019
T6 85mm Round (Simbac Tube)
Réf. 9530109
94mm Idle Insert
Réf. 9542008
T6 78mm Round
Réf. 9530107
T5/T6 70mm OCTAGONAL Aluminum
Réf. 9011878
T6-8-9 330X330 Motor side wall plate
Réf. 9017158
T5/T6 85mm Round (Simbac Tube)
Réf. 9420300
97mm Idle Insert
Réf. 9542009
T6 Drive Stop & Screw
Réf. 9910062
T6 Differential 60mm round
Réf. 9001407
Standard Motor Tester Cable, 4-Wire
Réf. 9012116
T5/T6 60mm Round Drive Aluminum
Réf. 9012950
Vertical wall angle bracket for side plates 9017157 and 9017166
Réf. 9017172
T6 70mm Octagonal Aluminum drive wheel
Réf. 9018630
2.5" (60mm) Round Drive "Soft Clip"
Réf. 9206041
T6 94mm Round
Réf. 9530124