Products
Obsolete product, replaced by
Ref : 2006337 - MOTOR T8M 200NM DIAM FROM 99 T
T8M 200Nm Diameter 99-107mm 10rpm 120V
T8 200Nm Diameter 99-107mm 10rpm 120V
MOTOR T8M 200NM DIAM FROM 99 TO 108 120V B
| Applications | ||
|---|---|---|
| Industrial & commercial closure / Rolling shutter | ||
| Embedded Technologies | Warranty | |
| Wired | 5 years | |
Technical information
| Approval |
|---|
|
Standard |
|
|---|---|
| Protection Index | IP 44 |
| Insulation class | Class I |
Dimension |
|
|---|---|
| Diameter | 80 mm |
Technology |
|
|---|---|
| Number of cycles per day (in cycles) | 10 |
Electrical |
|
|---|---|
| Consumption in standby mode | 0 W |
| Power supply | AC - RGE 2 - 120V/60HZ |
Mechanical |
|
|---|---|
| Speed | 10 rpm |
| Torque | 200 Nm |
| Power scale | AC MOTOR SINGLE PHASE 37,5W TO 750W |
Other |
|
|---|---|
| Minimum working temperature | 5 °C |
| Maximum working temperature | 40 °C |
| Minimum storing temperature | -20 °C |
| Maximum storing temperature | 80 °C |
| Thermical time | 4 min |
Accessories
20 Product(s)
T8 124mm Round Set for 200Nm to 280Nm
Réf. 9013824
97mm Idle Insert
Réf. 9542009
Safety Brake 404Nm Torque
Réf. 2005627
T6-8-9 280X280 Motor side wall plate
Réf. 9017157
94mm Idle Insert
Réf. 9542008
T8-9 Override Eye & Shaft
Réf. 9340020
124mm Idle Insert
Réf. 9542012
Safety Brake 3000Nm Torque
Réf. 2005625
T8 94mm Round Drive for 200Nm to 280Nm
Réf. 9001297
T6-8-9 280X280 Idler side wall plate
Réf. 9017166
Safety Brake 1000Nm Torque
Réf. 2005629
Standard Motor Tester Cable, 4-Wire
Réf. 9012116
Safety Brake 258Nm Torque
Réf. 2005626
T8 97mm Round Set for 200Nm to 280Nm
Réf. 9001312
T6-8-9 330X330 Idler side wall plate
Réf. 9017168
Vertical wall angle bracket for side plates 9017157 and 9017166
Réf. 9017172
Idler Support
Réf. 2003807
Safety Brake 708Nm Torque
Réf. 2005628
Safety Brake 1500Nm Torque
Réf. 2005624
T6-8-9 330X330 Motor side wall plate
Réf. 9017158
