Products
T3.5 10Nm 12rpm 12V
Ref : 2006977 - T3.5 10/12 12V C2,5M WHITE/1
T3.5 10Nm 12rpm 12V
MOTOR NT3,5 10NM/12RPM 12VDC X1
| Applications | ||
|---|---|---|
| Exterior Solar Screens / Interior Window Coverings : Shades | ||
| Embedded Technologies | Warranty | |
| Wired | 5 years | |
Technical information
Standard |
|
|---|---|
| Protection Index | IP 44 |
| Insulation class | Class III |
Dimension |
|
|---|---|
| Unwrapped length | 373 mm |
| Unwrapped width | 38 mm |
| Unwrapped height | 38 mm |
| Minimum internal diameter | 34 mm |
| External Diameter | 35 mm |
| Diameter | 40 mm |
Electrical |
|
|---|---|
| Consumption during operation | 30 W |
| Consumption in standby mode | 0 W |
| Minimum voltage | 9 V |
| Maximum voltage | 15 V |
| Rated current | 2.4 A |
| Power supply | DC - RGE 12 - 12V |
Mechanical |
|
|---|---|
| Speed | 12 rpm |
| Torque | 10 Nm |
| Type of limit switch unit | Mechanical |
| Capacity of the limit switch unit (turns) | 40 |
| Power scale | DC MOTOR 0W TO 37,5W |
| Head type | ROUND |
Cable |
|
|---|---|
| Cable type | VVF |
| Cable length | 2.5 m |
| Cable color | WHITE |
| Number of wires of the cable | 2 |
| Cable plug ends | STRIPPED |
| Wire section | 0.75 mm² |
Other |
|
|---|---|
| Minimum working temperature | -10 °C |
| Maximum working temperature | 40 °C |
| Minimum storing temperature | -20 °C |
| Maximum storing temperature | 80 °C |
| Thermical time | 4 min |
| Noise level (dB) | 72 dB |
Accessories
20 Product(s)
T3.5 Flat Mount Bracket
Réf. 9580009
Steel Ball Bearing for idlers with 10mm pin
Réf. 2003600
Nylon Ball Bearing 12mm ID for 1781030
Réf. 9028665
Drive Adaptor (for 40mm x 1mm Round Tube)
Réf. 9132142
T3.5 10mm SQ. Pin Mount Bracket
Réf. 9580008
Universal End Cap - Collapsible 12mm Shaft (for 2" (47mm) Round Tube)
Réf. 9420801
T3,5 40mm Octagonal
Réf. 9001481
40mm Octagonal Crown for 40mm x 0.8mm Octagonal Tube
Réf. 9147327
R8 Adaptor Plate
Réf. 9012258
Universal End Cap - Collapsible 10mm Shaft (for 2" (47mm) Round Tube)
Réf. 9420800
T3.5 38mm Round (Tube 40x1)
Réf. 9001495
400 Series to 500 Series Crown and Drive Adaptor Kit
Réf. 9013763
Crown Adaptor (for 40mm x 1mm Round Tube)
Réf. 9132143
Ball Support for 9410803 and 9028665
Réf. 1781030
Nylon Bearing for idlers with 10mm pin
Réf. 2003599
Crown (for 40mm x 1.5mm Round Tube)
Réf. 9147330
Drive for (40mm x 1.5mm Round Tube)
Réf. 9147544
Drive (for 40mm x 0.8mm Octagonal Tube)
Réf. 9147545
Nylon ball bearing 10mm ID for 1781030
Réf. 9410803
Operator Support for 10mm pin mount
Réf. 9510000