< Products

T8S DMI 200Nm Diameter 94mm 120V (SLIM Head) - 2008302 - 1 - Somfy
T8S DMI 200Nm Diameter 94mm 120V (SLIM Head) - 2008302 - 1 - Somfy
T8S DMI 200Nm Diameter 94mm 120V (SLIM Head) - 2008302 - 2 - Somfy

Ref : 2008302 - T820/10 S DMI Ø94 120/60

T8S DMI 200Nm Diameter 94mm 120V (SLIM Head)

MOTOR T8SDMI 200Nm D94 120/60

MOTOR T8SDMI 200 �94 120/60

Applications
Industrial & commercial closure / Rolling shutter
Embedded Technologies Warranty
Wired 5 years

Other documents & links

Product presentation

Technical information

Standard
Protection Index IP 44  
Insulation class Class I  
Gate operator type Axial tubular  

Dimension
Unwrapped length 710 mm  
Unwrapped width 130 mm  
Unwrapped height 130 mm  
Diameter 80 mm  

Technology
Number of cycles per day (in cycles) 10  

Electrical
Consumption during operation 600 W  
Consumption in standby mode 0 W  
Minimum voltage 108 V  
Maximum voltage 132 V  
Rated current 2.4 A  
Power supply AC - RGE 2 - 120V/60HZ  

Mechanical
Speed 10 rpm  
Torque 200 Nm  
Power scale AC MOTOR SINGLE PHASE 37,5W TO 750W  

Cable
Number of wires of the cable 4  
Wire section 0.65 mm²  

Other
Minimum working temperature 5 °C  
Maximum working temperature 40 °C  
Minimum storing temperature -20 °C  
Maximum storing temperature 80 °C  
Thermical time 4 min  

Accessories

22 Product(s)
Safety Brake 1500Nm Torque
Réf. 2005624
T8 94mm Round Drive for 200Nm to 280Nm
Réf. 9001297
T6-8-9 280X280 Idler side wall plate
Réf. 9017166
Idler Support
Réf. 2003807
Safety Brake 708Nm Torque
Réf. 2005628
T6-8-9 330X330 Motor side wall plate
Réf. 9017158
94mm Idle Insert
Réf. 9542008
Safety Brake 404Nm Torque
Réf. 2005627
T8 97mm Round Set for 200Nm to 280Nm
Réf. 9001312
T8 124mm Round Set for 200Nm to 280Nm
Réf. 9013824
T6-8-9 330X330 Idler side wall plate
Réf. 9017168
124mm Idle Insert
Réf. 9542012
T6-8-9 280X280 Motor side wall plate
Réf. 9017157
Safety Brake 258Nm Torque
Réf. 2005626
Chain Hoist for T8S DMI motors (without chain)
Réf. 9019458
97mm Idle Insert
Réf. 9542009
Safety Brake 1000Nm Torque
Réf. 2005629
Standard Motor Tester Cable, 4-Wire
Réf. 9012116
T8-S DMI Eye and Hex Shaft .28” x 15.7” (7 mm x 400mm)
Réf. 9018569
Vertical wall angle bracket for side plates 9017157 and 9017166
Réf. 9017172
Safety Brake 3000Nm Torque
Réf. 2005625
Chain for Chain Hoist
Réf. 9019460