Products

DMI5 50Nm 12rpm 120V
Ref : 2000776 - DMI5 50/12 120/60 C2,5M WHITE/
DMI5 50Nm 12rpm 120V
MOTOR DMI5 50NM/12RPM-120/60-C2,5M WHITE
Applications | ||
---|---|---|
Awning / Rolling shutter | ||
Embedded Technologies | Warranty | |
Wired | 5 years |
Other documents & links
Section Act for green
Technical information
Standard |
|
---|---|
Protection Index | IP 44 |
Insulation class | Class I |
Dimension |
|
---|---|
Unwrapped length | 617 mm |
Unwrapped width | 92 mm |
Unwrapped height | 92 mm |
Minimum internal diameter | 47 mm |
External Diameter | 45 mm |
Diameter | 50 mm |
Riveting position distance | 646 mm |
Electrical |
|
---|---|
Consumption during operation | 80 W |
Consumption in standby mode | 0 W |
Minimum voltage | 108 V |
Maximum voltage | 126 V |
Rated current | 0.8 A |
Power supply | AC - RGE 2 - 120V/60HZ |
Mechanical |
|
---|---|
Speed | 12 rpm |
Torque | 50 Nm |
Type of limit switch unit | Progressive |
Capacity of the limit switch unit (turns) | 28 |
Power scale | AC MOTOR SINGLE PHASE 37,5W TO 750W |
Repeatabilty | +/- 5 |
Head type | CMO |
Cable |
|
---|---|
Cable type | VVF |
Cable length | 2.5 m |
Cable color | WHITE |
Number of wires of the cable | 4 |
Cable plug ends | STRIPPED |
Wire section | 0.65 mm² |
Other |
|
---|---|
Minimum working temperature | -20 °C |
Maximum working temperature | 70 °C |
Minimum storing temperature | -20 °C |
Maximum storing temperature | 80 °C |
Thermical time | 5 min |
Noise level (dB) | 57 dB |
Accessories
58 Product(s)
Connector Sleeve 7mm Hex to 8mm Square
Réf. 9012323

T5/T6 60mm Round Drive Aluminum
Réf. 9012950

Universal End Cap - Collapsible 10mm Shaft (for 2" (47mm) Round Tube)
Réf. 9420800

T5 85mm Round (Simbac Tube)
Réf. 9521044

DS 78mm Round Crown
Réf. 9707027

DS 70mm Round Drive (0.8mm - 1mm)
Réf. 9751005

T5/T6 70mm OCTAGONAL Aluminum
Réf. 9011878

T5 70mm Octagonal Aluminum drive wheel
Réf. 9012812

107mm Sleeve Adaptor (Adaptor Set / Differential required for use)
Réf. 9012817

2.5" (60mm) Round Drive "Soft Clip"
Réf. 9206041

2.75" (67mm) Round Crown
Réf. 9707031

60mm Octagonal Drive
Réf. 9751001

SM65 (63mm) Round Drive
Réf. 9751002

DMI Bracket 1 piece round adjustable cast plate
Réf. 9420647

DMI Bracket 3 piece outside mount
Réf. 9520079

T5 70mm Round (Simbac Tube) Drive Wheel
Réf. 9521000

T5 71mm Round (Perma)
Réf. 9521010

Connector Sleeve 7mm Hex to 7mm Hex
Réf. 9685120

DS 78mm Round Drive
Réf. 9761001

DS 85mm Round Drive
Réf. 9761003

Ball Support for 9410803 and 9028665
Réf. 1781030

Universal Joint 7mm Hex to 8mm Square Connector
Réf. 2005416

Standard Motor Tester Cable, 4-Wire
Réf. 9012116

2" (47mm) Round Drive "Hard Clip"
Réf. 9206088

Nylon ball bearing 10mm ID for 1781030
Réf. 9410803

Extension Shaft 7mm Hex L=220mm with Screw
Réf. 9420657

Universal End Cap - Collapsible 12mm Shaft (for 2" (47mm) Round Tube)
Réf. 9420801

T5 70mm Octagonal Drive Wheel
Réf. 9521021

T5 70mm Octagonal Crown
Réf. 9521046

DMI Bracket 2 piece inside mount adjustable U
Réf. 2005701

Nylon Ball Bearing 12mm ID for 1781030
Réf. 9028665

T5 70mm Round (Simbac Tube) Crown
Réf. 9128424

2" (47mm) Round Drive "Soft Clip"
Réf. 9206089

T6 60mm Round
Réf. 9521028

T5 60mm Octagonal
Réf. 9521031

T5 50mm Octagonal
Réf. 9521054

DMI Bracket 100mm x 100mm
Réf. 9706034

2.5" (60mm) Round Crown
Réf. 9707026

70mm Octagonal Drive
Réf. 9761002

Take-Up Reel for 2" Tube
Réf. 1781151

T5 60mm Round Aluminum drive wheel
Réf. 9012813

T5 60mm Octagonal Aluminum
Réf. 9012951

Drive Stop and Screw
Réf. 9910004

Steel Ball Bearing for idlers with 10mm pin
Réf. 2003600

DS 78 LT50 Set
Réf. 9012239

T5 60mm Octagonal Aluminum drive wheel
Réf. 9012814

T5/T6 85mm Round (Simbac Tube)
Réf. 9420300

DMI Bracket 1 piece round adjustable plate
Réf. 9420654

Extension Shaft 7mm Hex L=330mm with Screw
Réf. 9420659

DMI Bracket 2 piece inside mount
Réf. 9520074

T5 85mm Round
Réf. 9521008

2.5" 60mm Octagonal Crown
Réf. 9707025

AMA/P71 LT50 Drive
Réf. 9751015

Nylon Bearing for idlers with 10mm pin
Réf. 2003599

Short Awning Override Shaft Ring
Réf. 9016332

T5/T6 67mm ROUND
Réf. 9206028

SM65 (63mm) Round Crown - 3 grooves
Réf. 9707030

DS 85mm Round Crown
Réf. 9707035