< Products

T3.5 10Nm 12rpm 24V - 2006978 - 1 - Somfy

Ref : 2006978 - T3.5 10/12 24V C2,5M WHITE/1

T3.5 10Nm 12rpm 24V

MOTOR T3,5 10NM/12RPM 24VDC X1

Applications
Exterior Solar Screens / Interior Window Coverings : Shades
Embedded Technologies Warranty
Wired 5 years

Technical information

Standard
Protection Index IP 44  
Insulation class Class III  

Dimension
Unwrapped length 373 mm  
Unwrapped width 38 mm  
Unwrapped height 38 mm  
Minimum internal diameter 34 mm  
External Diameter 35 mm  
Diameter 40 mm  

Electrical
Consumption during operation 29 W  
Consumption in standby mode 0 W  
Minimum voltage 18 V  
Maximum voltage 30 V  
Rated current 1.2 A  
Power supply DC - RGE 11 - 24V  

Mechanical
Speed 12 rpm  
Torque 10 Nm  
Type of limit switch unit Mechanical  
Capacity of the limit switch unit (turns) 40  
Power scale DC MOTOR 0W TO 37,5W  
Head type ROUND  

Cable
Cable type VVF  
Cable length 2.5 m  
Cable color WHITE  
Number of wires of the cable 2  
Cable plug ends STRIPPED  
Wire section 0.75 mm²  

Other
Minimum working temperature -20 °C  
Maximum working temperature 60 °C  
Minimum storing temperature -20 °C  
Maximum storing temperature 80 °C  
Noise level (dB) 72 dB  

Accessories

20 Product(s)
Drive (for 40mm x 0.8mm Octagonal Tube)
Réf. 9147545
Operator Support for 10mm pin mount
Réf. 9510000
T3.5 Flat Mount Bracket
Réf. 9580009
Ball Support for 9410803 and 9028665
Réf. 1781030
Universal End Cap - Collapsible 10mm Shaft (for 2" (47mm) Round Tube)
Réf. 9420800
Drive Adaptor (for 40mm x 1mm Round Tube)
Réf. 9132142
Universal End Cap - Collapsible 12mm Shaft (for 2" (47mm) Round Tube)
Réf. 9420801
T3,5 40mm Octagonal
Réf. 9001481
T3.5 38mm Round (Tube 40x1)
Réf. 9001495
R8 Adaptor Plate
Réf. 9012258
400 Series to 500 Series Crown and Drive Adaptor Kit
Réf. 9013763
40mm Octagonal Crown for 40mm x 0.8mm Octagonal Tube
Réf. 9147327
Crown (for 40mm x 1.5mm Round Tube)
Réf. 9147330
T3.5 10mm SQ. Pin Mount Bracket
Réf. 9580008
Nylon ball bearing 10mm ID for 1781030
Réf. 9410803
Nylon Bearing for idlers with 10mm pin
Réf. 2003599
Steel Ball Bearing for idlers with 10mm pin
Réf. 2003600
Drive for (40mm x 1.5mm Round Tube)
Réf. 9147544
Nylon Ball Bearing 12mm ID for 1781030
Réf. 9028665
Crown Adaptor (for 40mm x 1mm Round Tube)
Réf. 9132143